inadij.18
Membre VIP
- Inscrit
- 9 Juin 2012
- Messages
- 3 188
- Points
- 38
- #1
S'il vous plaît,
Connexion
ou
S'inscrire
pour voir le contenu ou les urls !
KERNEL n3oFlo_v10|THERMAL CONTROL|CPU:2GHz||GPU:487,5|VC|LOWFREQS|HP-CONT
Nexus 7 2013
Merci à
S'il vous plaît,
Connexion
ou
S'inscrire
pour voir le contenu ou les urls !
Avertissement : Cette opération comporte des risques. Ni moi ni Phonandroid ne peuvent être tenu responsables des éventuels problèmes rencontrés. Pensez à effectuer une sauvegarde avant d’exécuter cette opération!!
CARACTERISTIQUES :
Code:
S'il vous plaît,
Connexion
ou
S'inscrire
to view codes content!
CHANGELOG :
n3oFlo_v10_custom_hotplug
- fix lowfreqs not showing up, now they are available again
- fixup hotplug control again
- kernel based thermal control back
- fix lowfreqs not showing up, now they are available again
PRE-requis :
- Avoir déverrouillé votre bootloader voir tutoriel -->>Déverrouiller le bootloader - Google Nexus 7 2013
- Avoir installé le TWRP Recovery voir tutoriel -->> Installer le TWRP Recovery v2.6.0.0 - Google Nexus 7 2013 ou le CWM Recovery -->>Installer le CWM Recovery 6.0.3.6 - Google Nexus 7 2013
TELECHARGEMENT :
- S'il vous plaît, Connexion ou S'inscrire pour voir le contenu ou les urls !
- S'il vous plaît, Connexion ou S'inscrire pour voir le contenu ou les urls !
INSTALLATION :
- Téléchargez et copiez le fichier n3oFlo_v10_.... .zip dans la mémoire interne de votre tablette ( Internal storage )
- Tablette éteinte, démarrez là en mode bootloader -->> Appuyez en maintenant simultanément les boutons volume bas et power
- Dans le menu du mode bootloader, naviguez avec les touches volume jusqu'au menu Recovery mode et validez avec le bouton power
- Votre tablette redémarre dans le menu du TWRP Recovery
- Cliquez sur -->> Install -> rechercher le fichier n3oFlo_v10_..... .zip -> sélectionnez le -> et faites glissez de la gauche vers la droite pour l'installer : Swipe to confirm flash
- Vous devriez voir "successful" appuyez alors sur "Reboot system" pour redémarrer votre tablette
- Votre kernel est installé !!!
Modèle de configuration HOTPLUG CONTROL, THERMAL CONTROL, GOVERNORS
:(Traduction à venir)
MAX Perfromance, U dont give a rat ass about battery, SPEED and SMOOTHNESS is everything:
----------------------------------------------------------------------------------------------------
HOTPLUG CONTROL:
FIRST LEVEL: 50
SECOND LEVEL: 30
THIRD LEVEL: 10
FOURTH LEVEL: 5
GOVERNOR TUNEABLES (FOR INTERACTIVE):
UP_TRESHOLD: 65
GOVERNOR TUNEABLES (FOR SMARTMAX):
DONT CHANGE ANYTHING
BALANCE between perfromance and battery:
----------------------------------------------------------------------------------------------------
HOTPLUG CONTROL:
FIRST LEVEL: 65
SECOND LEVEL: 40
THIRD LEVEL: 20
FOURTH LEVEL 10
GOVERNOR TUNEABLES (FOR INTERACTIVE):
UP_TRESHOLD: 80
GOVERNOR TUNEABLES (FOR SMARTMAX):
DONT CHANGE ANYTHING
BATTERY LIFE is everything, I´m afraid of speed, and dont care about SMOOTH UI
----------------------------------------------------------------------------------------------------
BALANCE between perfromance and battery:
HOTPLUG CONTROL:
FIRST LEVEL: 80
SECOND LEVEL: 55
THIRD LEVEL: 35
FOURTH LEVEL: 20
GOVERNOR TUNEABLES (FOR INTERACTIVE):
UP_TRESHOLD: 95
GOVERNOR TUNEABLES (FOR SMARTMAX):
DONT CHANGE ANYTHING
THERMAL CONTROL HOWTO:
----------------------------------------------------------------------------------------------------
First have a look on the following folder:
sys/module/msm_thermal/parameters
now have a look at these 2 files:
limit freq
limit_temp_degC
In limit_freq u can adjust on which freqs it should fall back while throttling
In limit_temp_degC u can adjust the tempreature limit for throttling
EXAMPLE:
=======
#limit_freq
1458000 1242000 702000 384000
#limit_temp_degC
55,60,70,80
That means: it throttles to 1458Mhz @ 55 degrees , 1242MHz @ 60 degrees, 702MHz @ 70 degrees , 384MHz @ 80 degrees
SMARTMAX GOVERNOR
----------------------------------------------------------------------------------------------------
Adjust it like that u u wont have a single lag, this governor is simply outstanding:
Freq Range General: 270MHz - 1728MHz
awake_ideal_freq 594000
boost_freq 1242000
suspend_ideal_freq 384000
touch_poke_freq 1242000
Leave the rest untouched
----------------------------------------------------------------------------------------------------
HOTPLUG CONTROL:
FIRST LEVEL: 50
SECOND LEVEL: 30
THIRD LEVEL: 10
FOURTH LEVEL: 5
GOVERNOR TUNEABLES (FOR INTERACTIVE):
UP_TRESHOLD: 65
GOVERNOR TUNEABLES (FOR SMARTMAX):
DONT CHANGE ANYTHING
BALANCE between perfromance and battery:
----------------------------------------------------------------------------------------------------
HOTPLUG CONTROL:
FIRST LEVEL: 65
SECOND LEVEL: 40
THIRD LEVEL: 20
FOURTH LEVEL 10
GOVERNOR TUNEABLES (FOR INTERACTIVE):
UP_TRESHOLD: 80
GOVERNOR TUNEABLES (FOR SMARTMAX):
DONT CHANGE ANYTHING
BATTERY LIFE is everything, I´m afraid of speed, and dont care about SMOOTH UI
----------------------------------------------------------------------------------------------------
BALANCE between perfromance and battery:
HOTPLUG CONTROL:
FIRST LEVEL: 80
SECOND LEVEL: 55
THIRD LEVEL: 35
FOURTH LEVEL: 20
GOVERNOR TUNEABLES (FOR INTERACTIVE):
UP_TRESHOLD: 95
GOVERNOR TUNEABLES (FOR SMARTMAX):
DONT CHANGE ANYTHING
THERMAL CONTROL HOWTO:
----------------------------------------------------------------------------------------------------
First have a look on the following folder:
sys/module/msm_thermal/parameters
now have a look at these 2 files:
limit freq
limit_temp_degC
In limit_freq u can adjust on which freqs it should fall back while throttling
In limit_temp_degC u can adjust the tempreature limit for throttling
EXAMPLE:
=======
#limit_freq
1458000 1242000 702000 384000
#limit_temp_degC
55,60,70,80
That means: it throttles to 1458Mhz @ 55 degrees , 1242MHz @ 60 degrees, 702MHz @ 70 degrees , 384MHz @ 80 degrees
SMARTMAX GOVERNOR
----------------------------------------------------------------------------------------------------
Adjust it like that u u wont have a single lag, this governor is simply outstanding:
Freq Range General: 270MHz - 1728MHz
awake_ideal_freq 594000
boost_freq 1242000
suspend_ideal_freq 384000
touch_poke_freq 1242000
Leave the rest untouched