N
nico598862
Membre
- Inscrit
- 16 Novembre 2012
- Messages
- 10 214
- Points
- 0
- #1
Installation du Kernel custom SaberKernel
*** Pour ROMs basées Stock UNIQUEMENT ***
Sur Samsung Galaxy Note 2
Merci à
Avertissement : Cette opération comporte des risques. Phonandroid ne peut être tenu responsable des éventuels problèmes rencontrés. Pensez à effectuer un NANDROID BACKUP avant d'effectuer cette manipulation !
========================================
*** Pour ROMs basées Stock UNIQUEMENT ***
Sur Samsung Galaxy Note 2
Merci à
S'il vous plaît,
Connexion
ou
S'inscrire
pour voir le contenu ou les urls !
(Recognized Contributor / Recognized Developer)Avertissement : Cette opération comporte des risques. Phonandroid ne peut être tenu responsable des éventuels problèmes rencontrés. Pensez à effectuer un NANDROID BACKUP avant d'effectuer cette manipulation !
========================================
TELECHARGEMENTS :
- S'il vous plaît, Connexion ou S'inscrire pour voir le contenu ou les urls !
- S'il vous plaît, Connexion ou S'inscrire pour voir le contenu ou les urls !
- S'il vous plaît, Connexion ou S'inscrire pour voir le contenu ou les urls !
CHANGELOG :
9|11
Upgrade to Linux Version 3.0.95
Edits to GPU Voltage Allocation
Boeffla Sound Replaces Voodoo (by request)
Boeffla and Trickster apps now added with flash
Clean Up of Version
Remove Dirty in Version Description
USB Charging Rate Increased to match A/C rate
ZZmoove Updated to 7d
Fixed Memory/cache leak that was causing instability and poor battery
8|28
I have been slacking on releasing kernels outside of my ROMs so this changelog is kind of a mess.
If you cannot follow the log please see my git for itemized changes
--Upraded to Linux 3.0.93
-- Added in exfat module source thanks to Faux123 and SORC
-- ZZMOOVE updated to v0.7 (ZaneZam/Yank)
-- LulzactiveQ added in (Gohkanmoral)
-- Upgraded to Linux 3.0.91
-- Wifi driver edit for reduce wakelock
-- All sources Merged!!
-- Upgraded to Linux 3.0.87
-- Added ZZMOOVE
---- zzmoove edited to support more frequencies
-- Edits to WIFI handling for less wakelock issues/performance
-- Some Peg gov Edits
-- Edit to I/O que
-- Edits to kernel/module.c in hopes of further work on exfat later on
7|2 --
Upgraded to Linux Version 3.0.84
New Under Clock Frequency --STABALIZED
- 100 mhz UC all set
Triangle away support
---All testers have reported back as things being stable and most
have run it through intensive and reg use and no SOD at 100mhz low.
I believe the times of certain devices not liking the low step is over. Have Fun
6|24 --
Upgraded to Linux Version 3.0.83
2 Versions
--- One with UC for those who's chips dont mind
---One Stock Low end
New Under Clock Frequencies
- 120 mhz UC VERSION ONLY
Edits to Peg GOV in Both Versions
6|19 --
Upgraded to Linux Version 3.0.82
New Under Clock Frequencies
- 160 mhz
- 140 mhz
6|13 --
Complete Clean Rebuild from updated sources
Linux 3.0.81
ZRAM
Freq Voltage Edits
Compression Edits
Freq "Bleeding" fixed
Intelliplug/Ecomode
More Mali Edits
Dynamic Filesync
5|05 --
Upgraded to Linux Version 3.0.76
GPU Handling is Back And Fixed
Touchscreeen Mods
TouchBoost Control Added
SetLocalversion Modification ( Just Shows differently in about)
More...
4|26 --
Upgraded to Linux Version 3.0.75
TouchWake Added (Control With TricksterMod)
Voltages/Voltage interface Fixed for Undervolting Compatibility
FlexRate Edits
Fsync Edits
IntelliPlug
4|18 --
Upgraded to Linux Version 3.0.74
Edits to Freq/Voltage Handling
4|11 --
Upgraded to Linux Version 3.0.72
sysfys-helpers edit
double flexrate
Voltage control/UV voltage edits
Freq Edits
3|20 --
Upgraded to Linux Version 3.0.69
Etc
3|11 --
Voodo Sound Enabled
Upgraded to Linux Version 3.0.68
2|22 --
MHL Tv Out Audio Officially Fixed Damnit lol
Updated to Linux 3.0.64
2|15 --
Edit Frequencies
-OC to 1920
-Fix for CPU sticking Etc
-Removed GPU Edits From Last Version For Now
2|6 --
Mali Rework
GPU Can Now Be Adjusted By 3rd Party App
Ramdisk Modifications
- Fixed Memory Swap
- Probable MHL Audio Fix
Edit to Module.c
Added Lazy Governor
Added BFQv5 Sched
Added V(R) Sched
Set ReadAhead to 1024
Fixed Wonky Frequencies: No Issues With 3rd Party Apps Holding Freq
2|4 --
3.0.59 Revised
3.0.60
3.0.61
1900mhz OC!
Voltage Optimization
Edits to mali/gpu
Increased Charging Rate
2|1 --
Linux 3.0.59
Deadline Edit
Edits to sched.c
Multiple Updates from Samsung OSRC
1|28 --
Updated 27 Kernel Versions to Linux Kernel Version 3.0.58
-(ALOOOTTT of code updates)
Update to device sensors
1|21-- Initial Public Release
Upgrade to Linux Version 3.0.95
Edits to GPU Voltage Allocation
Boeffla Sound Replaces Voodoo (by request)
Boeffla and Trickster apps now added with flash
Clean Up of Version
Remove Dirty in Version Description
USB Charging Rate Increased to match A/C rate
ZZmoove Updated to 7d
Fixed Memory/cache leak that was causing instability and poor battery
8|28
I have been slacking on releasing kernels outside of my ROMs so this changelog is kind of a mess.
If you cannot follow the log please see my git for itemized changes
--Upraded to Linux 3.0.93
-- Added in exfat module source thanks to Faux123 and SORC
-- ZZMOOVE updated to v0.7 (ZaneZam/Yank)
-- LulzactiveQ added in (Gohkanmoral)
-- Upgraded to Linux 3.0.91
-- Wifi driver edit for reduce wakelock
-- All sources Merged!!
-- Upgraded to Linux 3.0.87
-- Added ZZMOOVE
---- zzmoove edited to support more frequencies
-- Edits to WIFI handling for less wakelock issues/performance
-- Some Peg gov Edits
-- Edit to I/O que
-- Edits to kernel/module.c in hopes of further work on exfat later on
7|2 --
Upgraded to Linux Version 3.0.84
New Under Clock Frequency --STABALIZED
- 100 mhz UC all set
Triangle away support
---All testers have reported back as things being stable and most
have run it through intensive and reg use and no SOD at 100mhz low.
I believe the times of certain devices not liking the low step is over. Have Fun
6|24 --
Upgraded to Linux Version 3.0.83
2 Versions
--- One with UC for those who's chips dont mind
---One Stock Low end
New Under Clock Frequencies
- 120 mhz UC VERSION ONLY
Edits to Peg GOV in Both Versions
6|19 --
Upgraded to Linux Version 3.0.82
New Under Clock Frequencies
- 160 mhz
- 140 mhz
6|13 --
Complete Clean Rebuild from updated sources
Linux 3.0.81
ZRAM
Freq Voltage Edits
Compression Edits
Freq "Bleeding" fixed
Intelliplug/Ecomode
More Mali Edits
Dynamic Filesync
5|05 --
Upgraded to Linux Version 3.0.76
GPU Handling is Back And Fixed
Touchscreeen Mods
TouchBoost Control Added
SetLocalversion Modification ( Just Shows differently in about)
More...
4|26 --
Upgraded to Linux Version 3.0.75
TouchWake Added (Control With TricksterMod)
Voltages/Voltage interface Fixed for Undervolting Compatibility
FlexRate Edits
Fsync Edits
IntelliPlug
4|18 --
Upgraded to Linux Version 3.0.74
Edits to Freq/Voltage Handling
4|11 --
Upgraded to Linux Version 3.0.72
sysfys-helpers edit
double flexrate
Voltage control/UV voltage edits
Freq Edits
3|20 --
Upgraded to Linux Version 3.0.69
Etc
3|11 --
Voodo Sound Enabled
Upgraded to Linux Version 3.0.68
2|22 --
MHL Tv Out Audio Officially Fixed Damnit lol
Updated to Linux 3.0.64
2|15 --
Edit Frequencies
-OC to 1920
-Fix for CPU sticking Etc
-Removed GPU Edits From Last Version For Now
2|6 --
Mali Rework
GPU Can Now Be Adjusted By 3rd Party App
Ramdisk Modifications
- Fixed Memory Swap
- Probable MHL Audio Fix
Edit to Module.c
Added Lazy Governor
Added BFQv5 Sched
Added V(R) Sched
Set ReadAhead to 1024
Fixed Wonky Frequencies: No Issues With 3rd Party Apps Holding Freq
2|4 --
3.0.59 Revised
3.0.60
3.0.61
1900mhz OC!
Voltage Optimization
Edits to mali/gpu
Increased Charging Rate
2|1 --
Linux 3.0.59
Deadline Edit
Edits to sched.c
Multiple Updates from Samsung OSRC
1|28 --
Updated 27 Kernel Versions to Linux Kernel Version 3.0.58
-(ALOOOTTT of code updates)
Update to device sensors
1|21-- Initial Public Release
INSTALLATION :
TWRP HAUTEMENT RECOMMANDE PAR LE DEVELOPPEUR
Téléchargez le kernel selon votre modèle de téléphone, en fichier ZIP ou TAR puis suivez ce guide.
Changelog
5|31--
3.0.80
Mali edits
GPU interface
GPU scaling now available and functional. Use trickster
5|08 --
Upgraded to Linux Version 3.0.77
Config edits
5|02 --
Upgraded to Linux Version 3.0.75
TouchWake Added (Control With TricksterMod)
Voltages/Voltage interface Fixed for Undervolting Compatibility
FlexRate Edits
Fsync Edits
IntelliPlug
*** GPU Reads Funny in Trickster. Will be fixed For next Update
4|18 --
Upgraded to Linux Version 3.0.74
Edits to Freq/Voltage Handling
4|11 --
Upgraded to Linux Version 3.0.72
sysfys-helpers edit
double flexrate
Voltage control/UV voltage edits
Freq Edits
3|20 --
Upgraded to Linux Version 3.0.69
Etc
3|11 --
Voodo Sound Enabled
Upgraded to Linux Version 3.0.68
2|22 --
MHL Tv Out Audio Officially Fixed Damnit lol
Updated to Linux 3.0.64
2|15 --
Edit Frequencies
-OC to 1920
-Fix for CPU sticking Etc
-Removed GPU Edits From Last Version For Now
2|6 --
Mali Rework
GPU Can Now Be Adjusted By 3rd Party App
Ramdisk Modifications
- Fixed Memory Swap
- Probable MHL Audio Fix
Edit to Module.c
Added Lazy Governor
Added BFQv5 Sched
Added V(R) Sched
Set ReadAhead to 1024
Fixed Wonky Frequencies: No Issues With 3rd Party Apps Holding Freq
2|4 --
3.0.59 Revised
3.0.60
3.0.61
1900mhz OC!
Voltage Optimization
Edits to mali/gpu
Increased Charging Rate
2|1 --
Linux 3.0.59
Deadline Edit
Edits to sched.c
Multiple Updates from Samsung OSRC
1|28 --
Updated 27 Kernel Versions to Linux Kernel Version 3.0.58
-(ALOOOTTT of code updates)
Update to device sensors
1|21-- Initial Public Release
3.0.80
Mali edits
GPU interface
GPU scaling now available and functional. Use trickster
5|08 --
Upgraded to Linux Version 3.0.77
Config edits
5|02 --
Upgraded to Linux Version 3.0.75
TouchWake Added (Control With TricksterMod)
Voltages/Voltage interface Fixed for Undervolting Compatibility
FlexRate Edits
Fsync Edits
IntelliPlug
*** GPU Reads Funny in Trickster. Will be fixed For next Update
4|18 --
Upgraded to Linux Version 3.0.74
Edits to Freq/Voltage Handling
4|11 --
Upgraded to Linux Version 3.0.72
sysfys-helpers edit
double flexrate
Voltage control/UV voltage edits
Freq Edits
3|20 --
Upgraded to Linux Version 3.0.69
Etc
3|11 --
Voodo Sound Enabled
Upgraded to Linux Version 3.0.68
2|22 --
MHL Tv Out Audio Officially Fixed Damnit lol
Updated to Linux 3.0.64
2|15 --
Edit Frequencies
-OC to 1920
-Fix for CPU sticking Etc
-Removed GPU Edits From Last Version For Now
2|6 --
Mali Rework
GPU Can Now Be Adjusted By 3rd Party App
Ramdisk Modifications
- Fixed Memory Swap
- Probable MHL Audio Fix
Edit to Module.c
Added Lazy Governor
Added BFQv5 Sched
Added V(R) Sched
Set ReadAhead to 1024
Fixed Wonky Frequencies: No Issues With 3rd Party Apps Holding Freq
2|4 --
3.0.59 Revised
3.0.60
3.0.61
1900mhz OC!
Voltage Optimization
Edits to mali/gpu
Increased Charging Rate
2|1 --
Linux 3.0.59
Deadline Edit
Edits to sched.c
Multiple Updates from Samsung OSRC
1|28 --
Updated 27 Kernel Versions to Linux Kernel Version 3.0.58
-(ALOOOTTT of code updates)
Update to device sensors
1|21-- Initial Public Release
