networking:
adb ppp <tty> [parameters] - Run PPP over USB.
Note: you should not automatically start a PPP connection.
<tty> refers to the tty for PPP stream. Eg. dev:/dev/omap_csmi_tty1
[parameters] - Eg. defaultroute debug dump local notty usepeerdns
adb sync notes: adb sync [ <directory> ]
<localdir> can be interpreted in several ways:
- If <directory> is not specified, both /system and /data partitions will be u
pdated.
- If it is "system" or "data", only the corresponding partition
is updated.
environmental variables:
ADB_TRACE - Print debug information. A comma separated list
of the following values
1 or all, adb, sockets, packets, rwx, usb, sync
, sysdeps, transport, jdwp
ANDROID_SERIAL - The serial number to connect to. -s takes prior
ity over this if given.
ANDROID_LOG_TAGS - When used with the logcat option, only these de
bug tags are printed.
C:\Users\guillaume\Downloads\ioroot25> that shou
ld be included in a bug report.
'that' n'est pas reconnu en tant que commande interne
ou externe, un programme exécutable ou un fichier de commandes.
C:\Users\guillaume\Downloads\ioroot25>
C:\Users\guillaume\Downloads\ioroot25> adb backup [-f <file>] [-apk|-noapk] [-s
hared|-noshared] [-all] [-system|-nosy
Le fichier spécifié est introuvable.
C:\Users\guillaume\Downloads\ioroot25>stem] [<packages...>]
Le fichier spécifié est introuvable.
C:\Users\guillaume\Downloads\ioroot25> - write an
archive of the device's data to <file>
La syntaxe de la commande n'est pas correcte.
C:\Users\guillaume\Downloads\ioroot25>.
'.' n'est pas reconnu en tant que commande interne
ou externe, un programme exécutable ou un fichier de commandes.
C:\Users\guillaume\Downloads\ioroot25> If no -f
option is supplied then the data is wr
-f était inattendu.
C:\Users\guillaume\Downloads\ioroot25>itten
'itten' n'est pas reconnu en tant que commande interne
ou externe, un programme exécutable ou un fichier de commandes.
C:\Users\guillaume\Downloads\ioroot25> to "backu
p.ab" in the current directory.
'to' n'est pas reconnu en tant que commande interne
ou externe, un programme exécutable ou un fichier de commandes.
C:\Users\guillaume\Downloads\ioroot25> (-apk|-no
apk enable/disable backup of the .apks
Plus ? themselves
Plus ? in the archive; the default is noapk.
)
'-apk' n'est pas reconnu en tant que commande interne
ou externe, un programme exécutable ou un fichier de commandes.
C:\Users\guillaume\Downloads\ioroot25> (-shared|
-noshared enable/disable backup of the
Plus ? device's
Plus ? shared storage / SD card contents; th
e defau
Plus ? lt is noshared.)
'-shared' n'est pas reconnu en tant que commande interne
ou externe, un programme exécutable ou un fichier de commandes.
C:\Users\guillaume\Downloads\ioroot25> (-all mea
ns to back up all installed applicatio
Plus ? ns)
'-all' n'est pas reconnu en tant que commande interne
ou externe, un programme exécutable ou un fichier de commandes.
'ns' n'est pas reconnu en tant que commande interne
ou externe, un programme exécutable ou un fichier de commandes.
C:\Users\guillaume\Downloads\ioroot25> (-system|
-nosystem toggles whether -all automat
Plus ? ically includes
Plus ? system applications; the default is t
o inclu
Plus ? de system apps)
'-system' n'est pas reconnu en tant que commande interne
ou externe, un programme exécutable ou un fichier de commandes.
C:\Users\guillaume\Downloads\ioroot25> (<package
s...> is the list of applications to b
Plus ? e backed up. If
Plus ? the -all or -shared flags are passed,
then t
Plus ? he package
Plus ? list is optional. Applications expli
citly g
Plus ? iven on the
Plus ? command line will be included even if
-nosys
Plus ? tem would
Plus ? ordinarily cause them to be omitted.)
Le fichier spécifié est introuvable.
'e' n'est pas reconnu en tant que commande interne
ou externe, un programme exécutable ou un fichier de commandes.
'the' n'est pas reconnu en tant que commande interne
ou externe, un programme exécutable ou un fichier de commandes.
'he' n'est pas reconnu en tant que commande interne
ou externe, un programme exécutable ou un fichier de commandes.
'list' n'est pas reconnu en tant que commande interne
ou externe, un programme exécutable ou un fichier de commandes.
'iven' n'est pas reconnu en tant que commande interne
ou externe, un programme exécutable ou un fichier de commandes.
'command' n'est pas reconnu en tant que commande interne
ou externe, un programme exécutable ou un fichier de commandes.
'tem' n'est pas reconnu en tant que commande interne
ou externe, un programme exécutable ou un fichier de commandes.
'ordinarily' n'est pas reconnu en tant que commande interne
ou externe, un programme exécutable ou un fichier de commandes.
C:\Users\guillaume\Downloads\ioroot25>
C:\Users\guillaume\Downloads\ioroot25> adb restore <file> - restore d
evice contents from the <file> backup
Le fichier spécifié est introuvable.
C:\Users\guillaume\Downloads\ioroot25>archive
'archive' n'est pas reconnu en tant que commande interne
ou externe, un programme exécutable ou un fichier de commandes.
C:\Users\guillaume\Downloads\ioroot25>
C:\Users\guillaume\Downloads\ioroot25> adb help - show this
help message
Android Debug Bridge version 1.0.31
-d - directs command to the only connected USB devic
e
returns an error if more than one USB device is
present.
-e - directs command to the only running emulator.
returns an error if more than one emulator is r
unning.
-s <specific device> - directs command to the device or emulator with
the given
serial number or qualifier. Overrides ANDROID_S
ERIAL
environment variable.
-p <product name or path> - simple product name like 'sooner', or
a relative/absolute path to a product
out directory like 'out/target/product/sooner'.
If -p is not specified, the ANDROID_PRODUCT_OUT
environment variable is used, which must
be an absolute path.
devices [-l] - list all connected devices
('-l' will also list device qualifiers)
connect <host>[:<port>] - connect to a device via TCP/IP
Port 5555 is used by default if no port number
is specified.
disconnect [<host>[:<port>]] - disconnect from a TCP/IP device.
Port 5555 is used by default if no port number
is specified.
Using this command with no additional arguments
will disconnect from all connected TCP/IP devic
es.
device commands:
adb push <local> <remote> - copy file/dir to device
adb pull <remote> [<local>] - copy file/dir from device
adb sync [ <directory> ] - copy host->device only if changed
(-l means list but don't copy)
(see 'adb help all')
adb shell - run remote shell interactively
adb shell <command> - run remote shell command
adb emu <command> - run emulator console command
adb logcat [ <filter-spec> ] - View device log
adb forward <local> <remote> - forward socket connections
forward specs are one of:
tcp:<port>
localabstract:<unix domain socket name>
localreserved:<unix domain socket name>
localfilesystem:<unix domain socket name>
dev:<character device name>
jdwp:<process pid> (remote only)
adb jdwp - list PIDs of processes hosting a JDWP transport
adb install [-l] [-r] [-s] [--algo <algorithm name> --key <hex-encoded key> --
iv <hex-encoded iv>] <file>
- push this package file to the device and instal
l it
('-l' means forward-lock the app)
('-r' means reinstall the app, keeping its data
)
('-s' means install on SD card instead of inter
nal storage)
('--algo', '--key', and '--iv' mean the file is
encrypted already)
adb uninstall [-k] <package> - remove this app package from the device
('-k' means keep the data and cache directories
)
adb bugreport - return all information from the device
that should be included in a bug report.
adb backup [-f <file>] [-apk|-noapk] [-shared|-noshared] [-all] [-system|-nosy
stem] [<packages...>]
- write an archive of the device's data to <file>
.
If no -f option is supplied then the data is wr
itten
to "backup.ab" in the current directory.
(-apk|-noapk enable/disable backup of the .apks
themselves
in the archive; the default is noapk.)
(-shared|-noshared enable/disable backup of the
device's
shared storage / SD card contents; the defau
lt is noshared.)
(-all means to back up all installed applicatio
ns)
(-system|-nosystem toggles whether -all automat
ically includes
system applications; the default is to inclu
de system apps)
(<packages...> is the list of applications to b
e backed up. If
the -all or -shared flags are passed, then t
he package
list is optional. Applications explicitly g
iven on the
command line will be included even if -nosys
tem would
ordinarily cause them to be omitted.)
adb restore <file> - restore device contents from the <file> backup
archive
adb help - show this help message
adb version - show version num
scripting:
adb wait-for-device - block until device is online
adb start-server - ensure that there is a server running
adb kill-server - kill the server if it is running
adb get-state - prints: offline | bootloader | device
adb get-serialno - prints: <serial-number>
adb get-devpath - prints: <device-path>
adb status-window - continuously print device status for a specifie
d device
adb remount - remounts the /system partition on the device re
ad-write
adb reboot [bootloader|recovery] - reboots the device, optionally into the boo
tloader or recovery program
adb reboot-bootloader - reboots the device into the bootloader
adb root - restarts the adbd daemon with root permissions
adb usb - restarts the adbd daemon listening on USB
adb tcpip <port> - restarts the adbd daemon listening on TCP on th
e specified port
networking:
adb ppp <tty> [parameters] - Run PPP over USB.
Note: you should not automatically start a PPP connection.
<tty> refers to the tty for PPP stream. Eg. dev:/dev/omap_csmi_tty1
[parameters] - Eg. defaultroute debug dump local notty usepeerdns
adb sync notes: adb sync [ <directory> ]
<localdir> can be interpreted in several ways:
- If <directory> is not specified, both /system and /data partitions will be u
pdated.
- If it is "system" or "data", only the corresponding partition
is updated.
environmental variables:
ADB_TRACE - Print debug information. A comma separated list
of the following values
1 or all, adb, sockets, packets, rwx, usb, sync
, sysdeps, transport, jdwp
ANDROID_SERIAL - The serial number to connect to. -s takes prior
ity over this if given.
ANDROID_LOG_TAGS - When used with the logcat option, only these de
bug tags are printed.
C:\Users\guillaume\Downloads\ioroot25> adb version - show vers
ion num
Android Debug Bridge version 1.0.31
C:\Users\guillaume\Downloads\ioroot25>
C:\Users\guillaume\Downloads\ioroot25>scripting:
'scripting:' n'est pas reconnu en tant que commande interne
ou externe, un programme exécutable ou un fichier de commandes.
C:\Users\guillaume\Downloads\ioroot25> adb wait-for-device - block unt
il device is online
c'est le message que j'ai sur la fenetre de commande avec ioroot 25
