kyo-ito
Membre
- Inscrit
- 5 Mai 2012
- Messages
- 9 692
- Points
- 36
- #1
GoogyMax-N4 Kernel
Avertissement : Cette opération comporte des risques. Ni PhonAndroid, ni moi-même ne peut être tenu responsable des éventuels problèmes rencontrés. Pensez à effectuer une sauvegarde avant d'installer ce Kernel
Merci à
S'il vous plaît,
Connexion
ou
S'inscrire
pour voir le contenu ou les urls !
Source S'il vous plaît,
Connexion
ou
S'inscrire
pour voir le contenu ou les urls !
S'il vous plaît,
Connexion
ou
S'inscrire
pour voir le contenu ou les urls !
S'il vous plaît,
Connexion
ou
S'inscrire
pour voir le contenu ou les urls !
Code:
S'il vous plaît,
Connexion
ou
S'inscrire
to view codes content!
[07SEP] Version 2.0 for TW5.1.1 :
- Built from scratch based on XXU1COH4
- Updated ramdisk to XXU1COH4 (permissive mode)
- Patched to 3.10.87
- A lot of patches & tweaks (lowmemkiller, kernel sched, arm, readahead, mm, ...)
- Ported HOTPLUG_THREAD_STOP from S6 sources
This is my departure gift as I am leaving Note4 N910C in favor of S6 G920F
[16AUG] Version 1.8 :
- Patched to 3.10.86
- A lot of patches & tweaks (lowmemkiller, kernel sched, smp, arm, workqueue ...)
Please confirm better responsiveness and battery life
[06AUG] Version 1.7 :
- Updated ramdisk to BOG1
- Added more GPU controls in stweaks (highspeed, tmu switch, tripping)
- Tuned GPU throttling levels
- A lot of tuning and reverts to get back to best balance between performance and battery life
I did my best on this one but all the credit goes to @arbi97 who tested every single change until the final result
PS: I didn't have time to look into the sound problem
[19JUL] Version 1.6 :
- Made SSwap and init.d switches ON by default
- Add KERNEL_MODE_NEON support
- Full support of Unaligned Memory Access
- Added LZ4 support
- Disabled a lot of debugging
- various performance tweaks (mmc, fs, ext4, ...)
IS IT SMOOTH ENOUGH NOW ???
[12JUL] Version 1.5 :
- patched to 3.10.84
- compiled again with gcc 5.1.1
- cpufreq: minor tweaks
- Added SSwap switch (off by default) & swappiness control
- Added switch for init.d execution by kernel boot script
- A lot of ramdisk & internal scripts corrections
- Googy-Max STweaks is now installed as user app not system
[06JUL] Version 1.4 :
- patched to 3.10.83
- FIXED MEM LEAK + SLOW RECENT APPS !!! (Now check memory usage and the speed of recent apps )
- Added LED fading control
- exynos: correct ASV max/min voltage values
- Cpufreq: raise OC for A53 to 1.8GHz and for A57 to 2.1GHz
[01JUL] Version 1.3 :
- patched to 3.10.82
- Compiled with linaro gcc 4.9 with optimization for cortex cpu
- various optimizations (mm, random, memcopy, sched, fs, mmc, ...)
- Some more fine-tuning for GPU scaling & throttling
[20JUN] Version 1.2 :
- patched to N910CXXU1BOE3 source drop
- Compiled with gcc 5.1.1
- CPU Voltage control (Deltas up to +/- 100 mV)
- CPU Clock control (A53: 200MHz -> 1500MHz / A57: 500MHz -> 2000 Mhz)
- GPU Voltage control (Deltas up to +/- 100 mV)
- GPU Clock control (100MHz -> 800MHz)
- GPU Thermal throttling control
- Re-Enabled swap, vnswap and zswap
- TCP congestion controls: bic-westwood-htcp-hispeed-hybla
- arch_power & gentle fair sleepers switchable
- Switchable logger via sysfs
- STweaks support
- Some more fine-tuning
- Built from scratch based on XXU1COH4
- Updated ramdisk to XXU1COH4 (permissive mode)
- Patched to 3.10.87
- A lot of patches & tweaks (lowmemkiller, kernel sched, arm, readahead, mm, ...)
- Ported HOTPLUG_THREAD_STOP from S6 sources
This is my departure gift as I am leaving Note4 N910C in favor of S6 G920F
[16AUG] Version 1.8 :
- Patched to 3.10.86
- A lot of patches & tweaks (lowmemkiller, kernel sched, smp, arm, workqueue ...)
Please confirm better responsiveness and battery life
[06AUG] Version 1.7 :
- Updated ramdisk to BOG1
- Added more GPU controls in stweaks (highspeed, tmu switch, tripping)
- Tuned GPU throttling levels
- A lot of tuning and reverts to get back to best balance between performance and battery life
I did my best on this one but all the credit goes to @arbi97 who tested every single change until the final result
PS: I didn't have time to look into the sound problem
[19JUL] Version 1.6 :
- Made SSwap and init.d switches ON by default
- Add KERNEL_MODE_NEON support
- Full support of Unaligned Memory Access
- Added LZ4 support
- Disabled a lot of debugging
- various performance tweaks (mmc, fs, ext4, ...)
IS IT SMOOTH ENOUGH NOW ???
[12JUL] Version 1.5 :
- patched to 3.10.84
- compiled again with gcc 5.1.1
- cpufreq: minor tweaks
- Added SSwap switch (off by default) & swappiness control
- Added switch for init.d execution by kernel boot script
- A lot of ramdisk & internal scripts corrections
- Googy-Max STweaks is now installed as user app not system
[06JUL] Version 1.4 :
- patched to 3.10.83
- FIXED MEM LEAK + SLOW RECENT APPS !!! (Now check memory usage and the speed of recent apps )
- Added LED fading control
- exynos: correct ASV max/min voltage values
- Cpufreq: raise OC for A53 to 1.8GHz and for A57 to 2.1GHz
[01JUL] Version 1.3 :
- patched to 3.10.82
- Compiled with linaro gcc 4.9 with optimization for cortex cpu
- various optimizations (mm, random, memcopy, sched, fs, mmc, ...)
- Some more fine-tuning for GPU scaling & throttling
[20JUN] Version 1.2 :
- patched to N910CXXU1BOE3 source drop
- Compiled with gcc 5.1.1
- CPU Voltage control (Deltas up to +/- 100 mV)
- CPU Clock control (A53: 200MHz -> 1500MHz / A57: 500MHz -> 2000 Mhz)
- GPU Voltage control (Deltas up to +/- 100 mV)
- GPU Clock control (100MHz -> 800MHz)
- GPU Thermal throttling control
- Re-Enabled swap, vnswap and zswap
- TCP congestion controls: bic-westwood-htcp-hispeed-hybla
- arch_power & gentle fair sleepers switchable
- Switchable logger via sysfs
- STweaks support
- Some more fine-tuning
● Un Galaxy Note 4 (SM-N910C)
● Minimum Lollipop 5.1.1 COH4
● Un Custom Recovery (CWM, PhilzTouch) --->
S'il vous plaît,
Connexion
ou
S'inscrire
pour voir le contenu ou les urls !
Désactiver le Verrouillage de Réactivation
/!\ ATTENTION /!\ A LIRE AVANT TOUTE MODIFICATION (FLASH, ROOT...ETC)
1 Téléchargez le Kernel
2 Copiez le dans le N4
3 Redémarrez en mode Recovery
4.Faites un Wipe Cache, Dalvik / Art
5 Selectionnez le fichier zip et installez le
6 Redémarrez (Reboot system now)
