K
KomodoDroid
Membre
- Inscrit
- 27 Octobre 2016
- Messages
- 4
- Points
- 0
- #1
Bonjour à tous,
Tout d'abord, je tiens à remercier les nombreux contributeurs aux posts précédents qui m'ont permis de cerner mon problème, mais pas de le résoudre malheureusement.
J'ai exactement le même problème que celui décrit dans le post suivant: samsung-galaxy-s4-mini-qui-ne-fonctionne-plus-t160617.html
Avec les mêmes écritures inscrites après avoir appuyé sur Vol Bas+Touche du milieu+Power, puis en en appuyant sur la touche Vol+, j'obtiens en haut à gauche:
(EN rouge) Odin mode
Product name: Gt-I9195
Current binary : Samsung official
System status : official
Knox kernel lock : 0x0
knox warranty void : 0x0
csb-config-lsb : 0x30
Bootloader ap swrev : 2
Write protection : enable
Au milieu : downloading ... do not turn off target
J'ai suivi la discussion avec l'admin, et j'ai suivi toutes les étapes de la marche à suivre.
L'installation vient de se terminer avec ODIN, mais le problème reste le même, démarrage, écran SAMSUNG et il reste bloqué. Je remarque que la musique de fond lors du démarrage a changé.
Merci de bien vouloir me guider, j'essaierais d'être le plus précis.
Cordialement
EDIT :
Voici les étapes que Odin a passé:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9195XXUCNK4_I9195QXZCOA1_I9195XXUCNK4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl2.mbn
<ID:0/004> sbl3.mbn
<ID:0/004> aboot.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> NON-HLOS.bin
<ID:0/004> cache.img.ext4
<ID:0/004> hidden.img.ext4
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Tout d'abord, je tiens à remercier les nombreux contributeurs aux posts précédents qui m'ont permis de cerner mon problème, mais pas de le résoudre malheureusement.
J'ai exactement le même problème que celui décrit dans le post suivant: samsung-galaxy-s4-mini-qui-ne-fonctionne-plus-t160617.html
Avec les mêmes écritures inscrites après avoir appuyé sur Vol Bas+Touche du milieu+Power, puis en en appuyant sur la touche Vol+, j'obtiens en haut à gauche:
(EN rouge) Odin mode
Product name: Gt-I9195
Current binary : Samsung official
System status : official
Knox kernel lock : 0x0
knox warranty void : 0x0
csb-config-lsb : 0x30
Bootloader ap swrev : 2
Write protection : enable
Au milieu : downloading ... do not turn off target
J'ai suivi la discussion avec l'admin, et j'ai suivi toutes les étapes de la marche à suivre.
L'installation vient de se terminer avec ODIN, mais le problème reste le même, démarrage, écran SAMSUNG et il reste bloqué. Je remarque que la musique de fond lors du démarrage a changé.
Merci de bien vouloir me guider, j'essaierais d'être le plus précis.
Cordialement
EDIT :
Voici les étapes que Odin a passé:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9195XXUCNK4_I9195QXZCOA1_I9195XXUCNK4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl2.mbn
<ID:0/004> sbl3.mbn
<ID:0/004> aboot.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> NON-HLOS.bin
<ID:0/004> cache.img.ext4
<ID:0/004> hidden.img.ext4
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)