A
alextueu6
Membre
- Inscrit
- 21 Janvier 2013
- Messages
- 36
- Points
- 6
- #1
bonjour gros soucis depuis 48h avec mon s8 je vous explique mon problème
alors voila j'avais un s8 avec une rom custom king rom v8 je voulais le restaurer pour le donner je suis donc entrer dans le bootloader twrp j'ai fais un full wipe ensuite au démarrage il ne s’allumait plus j'ai tous essayer pour remettre une rom stock mais impossible avec odin j'avais des message d'erreur mais je pouvais réinstaller une rom custom sa fonctionnais mais il faillais que je remettre une rom d'origine j’ai donc insister j’ai fais une grosse bêtise j'ai désactiver le déverrouillage oem donc la plus moyen de remettre une rom custom ni accéder au twrp j’ai télécharger une rom stock avec samfirm mais pareil lors que j’essaie de la flasher avec odin sa me met failed ou alors pass mais très rapidement je ne c’est plus quoi faire avec vous des idées merci ?
j'ai ce message sur mon s8 après que odin m'ait indiquer fail
sw rev check fail bootlader device 3 binary 1
Edit : et quand odin a l'air de fonctionner au bout de 4secondes sa m'affiche sa et mon s8 bootloop avec marquer toujours KING ROM en gros en dessous de samsung galaxy s8
alors voila j'avais un s8 avec une rom custom king rom v8 je voulais le restaurer pour le donner je suis donc entrer dans le bootloader twrp j'ai fais un full wipe ensuite au démarrage il ne s’allumait plus j'ai tous essayer pour remettre une rom stock mais impossible avec odin j'avais des message d'erreur mais je pouvais réinstaller une rom custom sa fonctionnais mais il faillais que je remettre une rom d'origine j’ai donc insister j’ai fais une grosse bêtise j'ai désactiver le déverrouillage oem donc la plus moyen de remettre une rom custom ni accéder au twrp j’ai télécharger une rom stock avec samfirm mais pareil lors que j’essaie de la flasher avec odin sa me met failed ou alors pass mais très rapidement je ne c’est plus quoi faire avec vous des idées merci ?
j'ai ce message sur mon s8 après que odin m'ait indiquer fail
sw rev check fail bootlader device 3 binary 1
Edit : et quand odin a l'air de fonctionner au bout de 4secondes sa m'affiche sa et mon s8 bootloop avec marquer toujours KING ROM en gros en dessous de samsung galaxy s8
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> skip file list for home binary
<ID:0/003> sboot.bin.lz4
<ID:0/003> param.bin.lz4
<ID:0/003> up_param.bin.lz4
<ID:0/003> cm.bin.lz4
<ID:0/003> boot.img.lz4
<ID:0/003> recovery.img.lz4
<ID:0/003> system.img.lz4
<ID:0/003> userdata.img.lz4
<ID:0/003> cache.img.lz4
<ID:0/003> Home Binary Download
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> modem.bin
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> Receive Response from boot-loader
<ID:0/003> modem_debug.bin
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> Receive Response from boot-loader
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> skip file list for home binary
<ID:0/003> sboot.bin.lz4
<ID:0/003> param.bin.lz4
<ID:0/003> up_param.bin.lz4
<ID:0/003> cm.bin.lz4
<ID:0/003> boot.img.lz4
<ID:0/003> recovery.img.lz4
<ID:0/003> system.img.lz4
<ID:0/003> userdata.img.lz4
<ID:0/003> cache.img.lz4
<ID:0/003> Home Binary Download
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> modem.bin
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> Receive Response from boot-loader
<ID:0/003> modem_debug.bin
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> Receive Response from boot-loader
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)