A
add91
Membre
- Inscrit
- 25 Avril 2017
- Messages
- 1
- Points
- 0
- #1
Bonjour
Je désirais revenir à une ROM antérieure, j'ai donc cherché sur sammobile une rom antérieur à celle qui était installée sur mon portable.
J'ai ce message d'erreur sur ODIN :SW REV. CHECK FAIL DEVICE : 4 BINARY 3
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> cache.img
<ID:0/004> cm.bin
<ID:0/004> hidden.img
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
Maintenant mon écran est cyan et indique An error has accorued while updating the device software.
Use the emergency recovery function in the smart switch software
Une idée?
D'avance merci
Je désirais revenir à une ROM antérieure, j'ai donc cherché sur sammobile une rom antérieur à celle qui était installée sur mon portable.
S'il vous plaît,
Connexion
ou
S'inscrire
pour voir le contenu ou les urls !
celle du 28/12/2016J'ai ce message d'erreur sur ODIN :SW REV. CHECK FAIL DEVICE : 4 BINARY 3
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> cache.img
<ID:0/004> cm.bin
<ID:0/004> hidden.img
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
Maintenant mon écran est cyan et indique An error has accorued while updating the device software.
Use the emergency recovery function in the smart switch software
Une idée?
D'avance merci