Killian30
Membre
- Inscrit
- 1 Décembre 2012
- Messages
- 595
- Points
- 16
- #1
Bonjour, je vous propose ce tuto pour flasher de nouveaux kernels pour vos G300:
Avertissement : Cette opération comporte des risques . Ni moi ni Phonandroid ne peut être tenu responsable des éventuels problèmes rencontrés.
]Ne marche uniquement sur les ROMs stock sous baseband 2030
alors télécharger le fichier installer le a la racine de la sd card et flasher le depuis le recovery pas besoin de wipe
#6 update kernel:
#7 update kernel:
#11 update kernel:
#12 update kernel:
#13 update kernel:
#14 update kernel:
#15 update kernel:
11/11/12 Release #19:
Init.d support from Cyda- need to know if this works, I don't use init.d scripts myself.
Some Governor tuning in interactiveX and conservative governors
Zram enabled
Dazzozo's fix for wifi crashing and deadlock from CAF
19/01/13 Release #6:
New kernel based of Geno's source.
Has Ramdisk from B952 stockplus.
Largely the same tweaks as before, but with some left out that I felt caused instabitity.
Seems to be about the same speed wise.
Looking to put some more changes in and hopefully fix zram eventually.
Includes the init from Unaszplodrmann.
19/01/13 Release #7
Removed the modified init, seems to cause some phone weirdness.
Set smartass2 as default governor.
Added more entropy into the kernel. I doubt it does anything, but why not. A bit more randomness to pull from can't hurt, can it?
Added updated zram and turned on in the defconfig
21/01/13 Release #11
Added Lagfree Governor
Added Wheatley Governer
23/01/13 Release #12
Made smartass2 a bit more responsive
Updated Freq's from CM9. 1.19ghz back, 1,3ghz gone because nobody can use it.
28/01/13 Release #13
Added swap
small memory management fix
turned off some huawei logging
03/02/13 Release #14
Goodbye Wheatley, wish you worked better on our phone.
07/02/13 Release #15
Really goodbye Wheatley, you stuck around like a bad rash.
Made working directory clean and did a full clean build.
Probably final unless some really cool stuff comes along to try.
Disclaimer stuff:
I have tested this as working on my phone, I am not responsible for fires, death or nuclear war breaking out if you use this kernel. I have only tested it using the stock+ B952 rom, but it should work on all stock based roms.
Le topic de modaco :
Je conseils de prendre une appli comme setcpu ou no frills cpu control et de mettre ces valeurs : SmartassV2 / sio / 300mhz / 1152mhz
J'attend vos retours
Avertissement : Cette opération comporte des risques . Ni moi ni Phonandroid ne peut être tenu responsable des éventuels problèmes rencontrés.
]Ne marche uniquement sur les ROMs stock sous baseband 2030
alors télécharger le fichier installer le a la racine de la sd card et flasher le depuis le recovery pas besoin de wipe
#6 update kernel:
S'il vous plaît,
Connexion
ou
S'inscrire
pour voir le contenu ou les urls !
#7 update kernel:
S'il vous plaît,
Connexion
ou
S'inscrire
pour voir le contenu ou les urls !
#11 update kernel:
S'il vous plaît,
Connexion
ou
S'inscrire
pour voir le contenu ou les urls !
#12 update kernel:
S'il vous plaît,
Connexion
ou
S'inscrire
pour voir le contenu ou les urls !
#13 update kernel:
S'il vous plaît,
Connexion
ou
S'inscrire
pour voir le contenu ou les urls !
#14 update kernel:
S'il vous plaît,
Connexion
ou
S'inscrire
pour voir le contenu ou les urls !
#15 update kernel:
S'il vous plaît,
Connexion
ou
S'inscrire
pour voir le contenu ou les urls !
11/11/12 Release #19:
S'il vous plaît,
Connexion
ou
S'inscrire
pour voir le contenu ou les urls !
Init.d support from Cyda- need to know if this works, I don't use init.d scripts myself.
Some Governor tuning in interactiveX and conservative governors
Zram enabled
Dazzozo's fix for wifi crashing and deadlock from CAF
19/01/13 Release #6:
New kernel based of Geno's source.
Has Ramdisk from B952 stockplus.
Largely the same tweaks as before, but with some left out that I felt caused instabitity.
Seems to be about the same speed wise.
Looking to put some more changes in and hopefully fix zram eventually.
Includes the init from Unaszplodrmann.
19/01/13 Release #7
Removed the modified init, seems to cause some phone weirdness.
Set smartass2 as default governor.
Added more entropy into the kernel. I doubt it does anything, but why not. A bit more randomness to pull from can't hurt, can it?
Added updated zram and turned on in the defconfig
21/01/13 Release #11
Added Lagfree Governor
Added Wheatley Governer
23/01/13 Release #12
Made smartass2 a bit more responsive
Updated Freq's from CM9. 1.19ghz back, 1,3ghz gone because nobody can use it.
28/01/13 Release #13
Added swap
small memory management fix
turned off some huawei logging
03/02/13 Release #14
Goodbye Wheatley, wish you worked better on our phone.
07/02/13 Release #15
Really goodbye Wheatley, you stuck around like a bad rash.
Made working directory clean and did a full clean build.
Probably final unless some really cool stuff comes along to try.
Disclaimer stuff:
I have tested this as working on my phone, I am not responsible for fires, death or nuclear war breaking out if you use this kernel. I have only tested it using the stock+ B952 rom, but it should work on all stock based roms.
Le topic de modaco :
S'il vous plaît,
Connexion
ou
S'inscrire
pour voir le contenu ou les urls !
Je conseils de prendre une appli comme setcpu ou no frills cpu control et de mettre ces valeurs : SmartassV2 / sio / 300mhz / 1152mhz
J'attend vos retours
