A
Anonymous
- #1
Bonjour à toutes et à tous, je vous présente la [ROM] [5.0.1] [XXUHOB7] [OFFICIAL] AMBASADII [KNOX 0x0] [DE-BLOATED] [MULTI-CSC]
Je ne suis pas le créateur de cette rom je ne fais que la partager afin que tous les possesseurs du S4 puissent en profiter.
Ambassadi Rom
:!::!::!::!::!::!::!::!::!::!::!::!::!::!::!::!::!::!::!::!::!::!:
CETTE OPÉRATION COMPORTE DES RISQUES. NI MOI NI PHONANDROID NE PEUVENT ÊTRE TENU RESPONSABLE DES ÉVENTUELS PROBLÈMES RENCONTRÉS. PENSEZ A FAIRE UNE SAUVEGARDE AVANT DE COMMENCER.
:!::!::!::!::!::!::!::!::!::!::!::!::!::!::!::!::!::!::!::!::!::!:
Un Galaxy GT-I9505 rooté (), un recovery custom d'installé (voir tutoriel) et une sauvegarde de votre dossier EFS (Sauvegarde Efs By Fred[/b]
Avant tout backup sur sd. Mettez la rom que vous avez téléchargé dans la mémoire externe de votre téléphone. Éteignez votre tel, redémarrer en recovery (volume haut + home + power) Faites un wipe data factory reset, Wipe cache et dalvik et clean to install a new rom. Dans custom format options, faites : system et preload. cache et data. Flashez le zip Reboot. Un peu de patience. .. Re démarrer si nécessaire, et ou, ôter un instant la batterie.
How to flash ROM without trigger Knox 0x0
1) Download and install Towelroot app from here. Don't use it yet.
2) Download Odin 3.09 from here
3) Download the GNF1 100% stock kernel for I9505 from here
4) Reboot your phone into download mode, run Odin and put the tar.md5 kernel file in PDA/AP and click on Start.
5) After this step, your Wi-Fi will not work. Don't worry, it will work again when you will flash the kernel matched to your ROM version.
6) Turn on you data connection (LTE) and run Towelroot app and tap "let it ra1n" (after that you can uninstall Towelroot app).
7) Reboot your phone into download mode and flash via Odin your original kernel, matched to the ROM version you are using. You can find here a kernel stock collection ( credits @peppe130 )
8) After reboot your WIFI connection will come back!
*If you are on leaked Lollipop you must first downgrade to Kitkat 4.4.2 becuse Mobile Odin v2.40 don't work on Lollipop!
(I test it by myself 100% safe without trigger Knox!)
If you have root permissons you are ready to flash my ROM:
1) Download and install Mobile Odin from Play Store.
2) Reboot your phone into download mode, run Odin and turn off autoreboot option , put the tar.md5 bootloader in PDA/BL and modem in PDA/CP and click on Start. When it's done restart Odin and phone to download mode and flash again modem in PDA/CP and click on Start.
3) Run Mobile Odin Pro and download necessary file!
4) Choose my rom in option "OTA/Update ZIP"
6) Untick option "Enable EverRoot", "Inject Superuser", "Inject Mobile Odin" we don't need this becouse rom is rooted/busyboxed
7) Chosee "Flash firmware" and the whole process will be automatically initiated.
That's all enjoy my rom with Knox 0x0
2) Download Odin 3.09 from here
3) Download the GNF1 100% stock kernel for I9505 from here
4) Reboot your phone into download mode, run Odin and put the tar.md5 kernel file in PDA/AP and click on Start.
5) After this step, your Wi-Fi will not work. Don't worry, it will work again when you will flash the kernel matched to your ROM version.
6) Turn on you data connection (LTE) and run Towelroot app and tap "let it ra1n" (after that you can uninstall Towelroot app).
7) Reboot your phone into download mode and flash via Odin your original kernel, matched to the ROM version you are using. You can find here a kernel stock collection ( credits @peppe130 )
8) After reboot your WIFI connection will come back!
*If you are on leaked Lollipop you must first downgrade to Kitkat 4.4.2 becuse Mobile Odin v2.40 don't work on Lollipop!
(I test it by myself 100% safe without trigger Knox!)
If you have root permissons you are ready to flash my ROM:
1) Download and install Mobile Odin from Play Store.
2) Reboot your phone into download mode, run Odin and turn off autoreboot option , put the tar.md5 bootloader in PDA/BL and modem in PDA/CP and click on Start. When it's done restart Odin and phone to download mode and flash again modem in PDA/CP and click on Start.
3) Run Mobile Odin Pro and download necessary file!
4) Choose my rom in option "OTA/Update ZIP"
6) Untick option "Enable EverRoot", "Inject Superuser", "Inject Mobile Odin" we don't need this becouse rom is rooted/busyboxed
7) Chosee "Flash firmware" and the whole process will be automatically initiated.
That's all enjoy my rom with Knox 0x0
How to flash Rom if you have Knox 0x1
1) Download and copy rom into MicroSD memory card
2) Flash latest custom recovery by Odin (position AP) if you don't have it!
3) Enter the CWM through a combination of keys HOME- POWER - and VOL UP BUTTON
4) Make a backup of EFS partition ! (optional but very important)
5) If you come from other custom rom do a full wipe!
6) Select the rom and run the installation
7) Flash by Odin bootloader (position BL) and modem (position CP)
2) Flash latest custom recovery by Odin (position AP) if you don't have it!
3) Enter the CWM through a combination of keys HOME- POWER - and VOL UP BUTTON
4) Make a backup of EFS partition ! (optional but very important)
5) If you come from other custom rom do a full wipe!
6) Select the rom and run the installation
7) Flash by Odin bootloader (position BL) and modem (position CP)
Rom:
S'il vous plaît,
Connexion
ou
S'inscrire
pour voir le contenu ou les urls !
PC Odin flashable files:
I9505XXUHOB7 bootloader
S'il vous plaît,
Connexion
ou
S'inscrire
pour voir le contenu ou les urls !
I9505XXUHOB7 modem
S'il vous plaît,
Connexion
ou
S'inscrire
pour voir le contenu ou les urls !
I9505XXUHOB7 stock kernel
S'il vous plaît,
Connexion
ou
S'inscrire
pour voir le contenu ou les urls !
Vos retours sont les bienvenus :amen:
Source:
S'il vous plaît,
Connexion
ou
S'inscrire
pour voir le contenu ou les urls !
