Première connexion AMAZFIT Pace...

  • Auteur de la discussion bazbal
  • Date de début
bazbal

bazbal

Membre
Inscrit
21 Novembre 2019
Messages
3
Points
1
  • #1
Bonjour. Impossible de connecter ma montre Pace. Avec Xiaomi MiA1 (andro 9 ) dernière MAJ (hier). J'ai donné toutes les autorisations à l'appli.
Montre chargée a 100 %
Refait l'opération plusieurs fois après désinstallation de l'appli.
Quelqu'un a t il eu ce problème ?
Merci par avance
 

Fichiers joints

  • Screenshot_20191120-203746.png
    Screenshot_20191120-203746.png
    151.1 KB · Affichages: 151
  • Screenshot_20191120-215719.png
    Screenshot_20191120-215719.png
    149.7 KB · Affichages: 165
spat

spat

Moderateur Global
Inscrit
27 Décembre 2012
Messages
14 241
Points
113
  • #2
Salut,
Essaie voir de vider le cache de l'appli qui gère la montre ainsi que les données.
Il est possible que tu ais des restes de l'ancienne version Android qui traîne.
A plus
 
bazbal

bazbal

Membre
Inscrit
21 Novembre 2019
Messages
3
Points
1
  • #3
merci , en fait c'est une montre que je viens d' acheter. J'ai vidé le cache, réinstallé ...
 
bazbal

bazbal

Membre
Inscrit
21 Novembre 2019
Messages
3
Points
1
  • #4
Après contact d'amazfit: il faut mettre à jour la montre soit en passant par une ancienne version andro (mais pas trop vieille ...), soit avec un iphone, soit avec windows.
Si ça intéresse qq : la procédure.

Thank you for contacting Amazfit. We are very glad to assist you.

Is it your first time to pair the Pace watch? What's the OS version of your mobile phone? Please understand that the firmware version which supports Android 8.0/8.1 is 1.3.5+.

If it's your first time to pair the watch with an Android phone with Android 8+, please use your friend's or family's Android phone ( not Android 8/8.1) to update the watch. After the update the watch to the latest version 2.8.4.0, you can log in the app on your phone using the same account to connect your watch. No need to factory reset the watch to get the QR code to connect. Hope you can understand.

And also you can use an iPhone to update the watch.
1) Connect Pace to iPhone and login to the app.
2) Connect Pace to WiFi and Update Pace Software.
3) Unpair Pace from iPhone to get back the pairing QR code.
4) Restarting your Android phone
5) Log in the app on your Android phone using the same account to pair and connect your watch

And please note that when the watch shows pairing code, please swipe down from the top screen of your phone to check if you receive a message to let you confirm for Bluetooth connection. The message is shown very briefly and it disappears very soon. But you can find it in the top tray area. After confirmation the device and the watch can be connected immediately.

If the issue can not be resolved, please update the app to the latest version 2.7.0 and then attempt the following steps. Please note that all these four steps are critical important :)

1. Go to phone settings to find Bluetooth setting and then clear Bluetooth cache.
2. Toggle Bluetooth OFF and ON.
3. Reboot the watch and phone.
4. Log out and then re-open app and try connecting again.

We sent you a tool to upgrade the watch. Please tap the following link to install the file on your computer to have a try :

S'il vous plaît, Connexion ou S'inscrire pour voir le contenu ou les urls !


Please make sure the watch is fully charged first.

A. If your computer system has installed an ADB driver, please skip step A.
If you are not sure, you can connect the watch and the charger data cable to the computer, then click on the file ADBDriverInstaller.exe in the folder, as shown in the screenshot below does not require installation :

XnVSHYGOyW544AqQXBxJQ36n6UobkXX1XGP8VIw8riYSW5HTJEToxvz-SVzYwqh1CuhLSTFtbjxcwXj5kAmR7pHTtVDXcWpshutUwBPEPiqjTnp6P62MtLrpHPOGuNV7gQxEBX-GQUDUHdRep1baOlo7=s0-d-e1-ft


If the ADB driver is not installed, there are 2 ways to install it. Please make sure you insert the watch into its charging base and then attach the USB end of the charger to your PC.
1) Click the ADBDriverInstaller.exe program in the current folder, and then click the install button to install the relevant driver
2) Double-click the Amazfit Watch Tools.exe program, enter the number 3 and click the install button to install

g0Sh2Q3KVRehYUUm645P5lVK9h-aVU5CkU8EyV-59URVcoKFv28WEfrmk3iNoeJa31ddpU7ZzNva3Okr1Hv3g4lJnRan_SMFIIUbyEwI1wIDZGVsq9hpqIg0ZGOyWtWsgsw0dq59M7lvdWfTeC4lMlai=s0-d-e1-ft


B. After ADB driver is installed, please attempt the following steps to upgrade the watch to the version 1.3.8a:

Double-click the Amazfit Watch Tools.exe program to execute the file. And please make sure the watch and computer are connected before executing the file.
SvFw_3ALrZsUxzu0N-qbtI0qF_LKlW66GJ3h_QhqkEsadgKHlYrcj3sJFMQTyVAXy6m1qLhD9TdCyG7WDCryugNshLLG9f36fvC_OiMpnDIDLTUHulw0nxHGKJUJAw9CsxmxBbfB_rOgJOs-QY-biOVomw=s0-d-e1-ft

The program running interface is as follow:

WiWkIDCwg-ZxS8dxfqO-d6s4znzZvPoKKpQbLe8XihGdexEmm-wOIsRt5Wy4pTqpE3soe0wPvHDI7UwYBLUPSbSQYHxUFwjh7QEpDmQDWIpTSIpFIau4wDHiu7sveLy1HmNnzJwOObTG9BiZYraxtCNrFA=s0-d-e1-ft


Double tap 'Amazfit Watch Tools' and enter 1 before press Enter.

After you update the watch to version 1.3.8a, you can pair and connect the watch with your mobile phone to update it to the latest version 2.8.1.0.

Hope this info helps. Should you have any further questions, please ask. We are more than happy to help! Thank you and have a nice day!
 
  • Like
Les réactions: urok et spot75
spat

spat

Moderateur Global
Inscrit
27 Décembre 2012
Messages
14 241
Points
113
  • #5
Salut,
Parfait ça, merci d'avoir laissé le process.
Avec un petit bonjour du jour, c'était au top [emoji6]
 
S

spot75

Membre
Inscrit
5 Mars 2015
Messages
1
Points
1
  • #6
Bonjour,
J'avais le même problème, impossible s'associer amzafit pace avec mon redmi note 8 pro.
Le mode opératoire fonctionne, merci Bazbal !
Connexion du 1er coup après la mise à jour.
:love:
 
  • Like
Les réactions: urok
Haut Bas