[KERNEL] ThundeRStormS "Galaxy S7/S7edge (SM-G930/935 F/FD) NFE/N8 -PIE kernel" |V2.0| 25-08-2019

  • Auteur de la discussion texas2607
  • Date de début
texas2607

texas2607

Moderateur Global
Inscrit
5 Février 2012
Messages
10 840
Points
113


Lors de l'utilisation des kernels personnalisés , ne jamais désactiver les options de développement ou déverrouillage OEM . Si vous le faites , au reboot de votre appareil , vous serez bloqué par le verrou de réactivation !

Cette opération comporte des risques. Ni moi ni Phonandroid ne peuvent être tenu responsables des éventuels problèmes rencontrés. Pensez à effectuer une sauvegarde de votre système et EFS avant toutes modifications ou flash !




S'il vous plaît, Connexion ou S'inscrire pour voir le contenu ou les urls !


NFE/N8 PIE - Android 9.0.0 STOCK RELEASE odexed roms
S7 Stock NFE /N8 PIE ROMs - G930/G935 F/FD

This kernel is for stock rom odexed.

Ce kernel utilise un installeur AROMA pour vous aider lors de l'installation




- based on stock Samsung kernel S5CSF1
- based on stock Samsung ramdisk S5CSF1 | sepolicy 05.2019
- based on latest ELS source ||3.18.140||
- Flat and Edge support
- Odexed / Deodexed Roms
- aroma installer
- init.d support
- lot of CPU governors
- Conservative governor editable (now You can edit governors values)
- lower than stock's values for big and little CPUs frequencies to 208/130 MHz
- lower than stock's values for GPU frequencies to 112MHz
- lot of I/O schedulers
- TCP : cubic, htcp, reno, bic, westwood, vegas, veno, lia, olia, wvegas
- SELinux status to permissive/enforcing
- disasbled DM-Verity, Knox, RKP, Tima, Rooting Restriction
- Magisk, ThunderTweaks
- fixed TWRP 3.2.3-0 by Tkkg1994
- Spectrum support
- ArchPower
- PWM Flicker Free
- CPU voltage control
- standard wakelocks
- Boeffla wakelock control
- Battery settings controls
- ABS clock fixed to 64bit
- GPU Thermal Throttling
- GPU voltage control
- GPU OC to 806 MHz
- F2FS files support
- Fsync control and CRC
- Dynamic Fsync
- Gentle Sleepers support
- Wireguard VPN support
- Moro Sound Drivers
- LED controls
- Support 10 Spectrum Profiles with ThundeRStormS profiles
- ThunderStrom CPU governor based on Interactive with new editable feature
- Gestures Wakeup controls
- Support Hotplugs : Alucard, AiO, Zen Decision and AutoSMP, Mako, Cluster, Thunderbolt, Lazy, Fast, MSM - first kernel with this features
..MTweaks do not support all features of hotplugs so all settings are not available to change
..You can do it via file browser and change values in sys files of this module - some parts.
- VNSwap default is turned ON | If You want it OFF, select in Aroma Installer.
- ZRAM max file is changed to 4,0GB but default is turned OFF | disk space for ZRAM is editable.
- Input Boost drivers and control for CPU each core | first kernel with this feature for S7 TW
- Input Boost for CPU | for Little.big clusters first kernel with this feature for S7 TW
- Fingerprint Boost | first kernel with this feature for S7 TW
- this kernel is not for people who want to get big bentchmark scores, OC, etc.
- this kernel is for daily use for better battery life with good balanced work

What is not included:
- no OC for CPU
- no synapse support



Version 2.0
-Updated Ramdisk G930FXXS5CSF1
-Updated Sources G930FXXS5CSF1
-Linux Updated to 3.18.140
-Some Changes in Aroma by @MissACCA
-New Aroma theme by @Tagdu17 & @nalas
-New splash screen by @nalas
-Added CPU Input Boost for each core
-Two New Cpu Gov has been added
-MinMax
-Userspace
-Spectrum Profiles Updated
-Fixed Auto Installation of -ThunderTweaks by @Noid
-ThunderTweaks v1.0.3.2
-Magisk 19.4
-Better Stability and RAM -Management

Version 1.9
ROM PIE NFE and N8 support
Samsung sources U4CSC4
Samsung ramdisk U4CSC4
ThunderTweaks 1.0.3.1 | adaptaded to ThundeRStormS kernels |
Flat and Edge now supported
Magisk 19.4
REMOVED : TWRP 3.3.0-0 fixed by AJ's
Knox 0x0 & SafetyNet with SuperSU and Magisk
SuperSU 2.82SR5 + SuHide v1.09
Linux 3.18.91 Samsung source
Game Tools Fix - thx to MoroGoku
Camera Fix - now SONY/SAMSUNG works
CPU Freq range : Higher Freq 2600/1586 MHz and Low Freq at 208/130 MHz
CPU Freq setup : Higher Freq 2288/1586 MHz and Low Freq at 312/234 MHz
CPU Freq setup : changes in voltage tables for lower power consuption for boot and normal work time
Fixed ABS clock to 64bit
Compiler : aarch64-linux-android-4.9
Spectrum and profiles supported
Iris service disabled
Support now 10 Spectrum Profiles with NEW ThundeRSTormS profiles
Added NEW Thunderstorm CPU Governor based on Interactive with new editable feature
Added TTL support for IP
Bluetooth OREO drivers
GPU R28 PIE drivers only
REMOVED GPU LIBS for Oreo and PIE | now rom's libs will be used.
Added new I/O scheds : Anxiety and Maple
Some CPU governors are updated
Wireguard VPN supported
Gestures Wakeup supported
Added SSP sensor battery drain
Added full support Hotplugs : Alucard, AiO, Zen Decision and AutoSMP, Mako, ClusterPlug, ThunderPlug
ZRAM max files set at 4,0GB - default OFF | Now is editable by user.
VNSwap truned ON by default | If You want to turn it OFF You have to select one option for it in Aroma Installer.
Fingerprint Boost support - default turned OFF.
Added Input Boost for big.LITTLE clusters.
Fixed AiO and AutoSMP Hotplugs for 2 Clusters Octa cores Exynos
ZSWAP RAM Pool set max from 50 to 60%
Some source fixes
Added NEBULA CPU gov
Possibly Fixed drain battery and some improvements
SELinux Permissive

Version 1.8
-Samsung sources U4CSC4
-Samsung ramdisk U4CSC4
-ThunderTweaks 1.0.1 | all features of the kernel now are editable |
-Flat and Edge now supported
-Magisk 19.3
-Knox 0x0 & SafetyNet with SuperSU and Magisk
-Linux 3.18.91 Samsung source
-Unlocked big CPU 4 cores to 2600MHz
-CPU Freq range : Higher Freq 2600/1586 MHz and Low Freq at 208/130 MHz
-CPU Freq setup : Higher Freq 2288/1586 MHz and Low Freq at 312/234 MHz
-GPU Freq: 112-806MHz Stock
-Added GPU Throttling
-Added CPU and GPU voltage control
-Added GPU OC to 806MHz
-Added Fsync - default turn off
-Added CRC - default turn off
-Added standard wakelocks
-Added Boeflla wakelocks
-Added NEW Thunderstorm CPU governor based on Interactive with new editable feature
-Added Battery Store and settings control
-Fixed ABS clock to 64bit
-Compiler : aarch64-linux-android-4.9
-Spectrum and profiles supported
-Wireguard VPN supported
-Possibly Fixed drain battery
-Some CPU governors
-Bluetooth OREO drivers
-Support to 9 Spectrum Profiles | some of them edited by TS Team
-Lot of I/O Shedulers : added Anxiety and Maple
-HMP settings : 680/250 and some freq chcnages
-USB charge to 600MHz in normall mode
-USB charge to 900MHz in fast mode
-Added VENO, VEGAS to TCP, etc.
-Lot of CPU governors
-Added PWM Flicker Free - default turn off
-Moro Sound Drivers v2.1.1
-Led controls with fade
-Added TTL support for IP
-SELinux Permissive
-Fixed Game Tools problem with reboots
-Added 4 cores max freq toggle
-Added Powersuspend
-Added DynamicFsync
-Added Archpower support and Gentle sleepers
-Fixed SSP sensor battery drain
-some SCSI drivers fixes for more stability
-some changes in voltage tables for lower power consumption in boot time and normal work
-added LED control with Fade feature
-added Gesture Wakeup support
-IRIS service disabled
-added Hotplugs : Alucard, AiO, Zen Decision and AutoSMP, Mako, Blue, Cluster | first kernel on S7 TW
-Added Stop background Camera Google and another Google services
- VNSwap default is ON
-ZRAM files is set max at 4,0GB
-ZRAM max disk size is now editable by user
-added Fingerprint Boost - default is OFF
-added CPU Boost for big.LITTLE Clusters - default OFF
-ZSWAP max RAM Pool set from 50 to 60%
-fixed AiO, AutoSMP hotplugs
-TWRP 3.3.0-0 fixed by AJ's
- better battery life and stability

Version v1.7
ROM PIE NFE and N8 support
Samsung sources U4CSC4
Samsung ramdisk U4CSC4
ThunderTweaks 1.0.0 | adaptaded to ThundeRStormS kernels |
Flat and Edge now supported
Magisk 19.0 back again
TWRP 3.3.0-0 fixed by AJ's
Knox 0x0 & SafetyNet with SuperSU and Magisk
SuperSU 2.82SR5 + SuHide v1.09
Linux 3.18.91 Samsung source
Game Tools Fix - thx to MoroGoku
Camera Fix - now SONY/SAMSUNG works
CPU Freq range : Higher Freq 2600/1586 MHz and Low Freq at 208/130 MHz
CPU Freq setup : Higher Freq 2288/1586 MHz and Low Freq at 312/234 MHz
CPU Freq setup : changes in voltage tables for lower power consuption for boot and normal work time
Fixed ABS clock to 64bit
Compiler : aarch64-linux-android-4.9
Spectrum and profiles supported
Iris service disabled
Support now 5 Spectrum Profiles with NEW ThundeRSTormS profile
Added NEW Thunderstorm CPU Governor based on Interactive with new editable feature
Added TTL support for IP
Added new I/O scheds : Anxiety and Maple
Some CPU governors are updated
Wireguard VPN supported
Gestures Wakeup supported
Added SSP sensor battery drain
Added Hotplugs : Alucard, AiO, Zen Decision and AutoSMP, Mako, Cluster | MTweaks don't support some settings yet but will be in the future - thx to Moro.
ZRAM max files set at 2,5GB - default OFF | Now is editable by user.
VNSwap truned ON by default | If You want to turn it OFF You have to select one option for it in Aroma Installer.
Fingerprint Boost support - default turned ON | MTweaks don't support toggle yet but will be in the future - thx to Moro.
Fixed AiO and AutoSMP Hotplugs for 2 Clusters Octa cores Exynos
ZSWAP RAM Pool set max from 50 to 60%
Possibly Fixed drain battery
SELinux Permissive




S'il vous plaît, Connexion ou S'inscrire pour voir le contenu ou les urls !





- MTWeaks ne supporte pas encore tous les paramètres des Hotplugs et Fingerprint Boost, vous n'en verrez donc pas certaines parties.
- pour désactiver l'échange VNSwap, sélectionnez l'option TS dans Aroma Installer. |Si vous voulez revenir à VNSwap ON Vous devez supprimer le script TS dans Init.d ou réinstaller le kernel avec les paramètres par défaut dans Aroma.
- ThunderTweaks v1.0.1 est maintenant adapté pour les kernels ThundeRStormS




Si vous voulez flasher ce Kernel et que vous avez installé un autre Kernel personnalisé comme MoRoKernel ou Arianoxx, vous devez effacer le cache MTweaks ou Kernel Adiutor avant de l'installer.
  • Effacer le cache des applications telles que : Kernel Adiutor ou MTweaks ou une autre application dans le gestionnaire d'applications système !
  • Télécharger la dernière version du Kernel et copier le fichier sur la carte SD
  • Rentrer en Recovery (Vol Plus + Power + Home)
  • Installer le Kernel
  • Choisissez vos options d'installation dans Aroma
  • --> Flasher Magisk séparément ou avec l'installateur Aroma
  • Reboot
  • (Mtweaks est copié sur la carte SD, vous pouvez l'installer manuellement)


ThunderTweaks
Pour modifier la plupart des paramètres du Kernel, il est recommandé d'utiliser l'application ThunderTweaks.

S'il vous plaît, Connexion ou S'inscrire pour voir le contenu ou les urls !
 
Dernière édition:
Dernière édition:
coyote950

coyote950

Bip Bip !!
Moderateur Global
Inscrit
5 Février 2013
Messages
23 294
Points
113
Salut Fred et merci pour le partage (y)
 
texas2607

texas2607

Moderateur Global
Inscrit
5 Février 2012
Messages
10 840
Points
113
Hello Micka
Avec plaisir
 
texas2607

texas2607

Moderateur Global
Inscrit
5 Février 2012
Messages
10 840
Points
113
Salut,
Mise à jour en v1.8

Changelog
Version 1.8
-Samsung sources U4CSC4
-Samsung ramdisk U4CSC4
-ThunderTweaks 1.0.1 | all features of the kernel now are editable |
-Flat and Edge now supported
-Magisk 19.3
-Knox 0x0 & SafetyNet with SuperSU and Magisk
-Linux 3.18.91 Samsung source
-Unlocked big CPU 4 cores to 2600MHz
-CPU Freq range : Higher Freq 2600/1586 MHz and Low Freq at 208/130 MHz
-CPU Freq setup : Higher Freq 2288/1586 MHz and Low Freq at 312/234 MHz
-GPU Freq: 112-806MHz Stock
-Added GPU Throttling
-Added CPU and GPU voltage control
-Added GPU OC to 806MHz
-Added Fsync - default turn off
-Added CRC - default turn off
-Added standard wakelocks
-Added Boeflla wakelocks
-Added NEW Thunderstorm CPU governor based on Interactive with new editable feature
-Added Battery Store and settings control
-Fixed ABS clock to 64bit
-Compiler : aarch64-linux-android-4.9
-Spectrum and profiles supported
-Wireguard VPN supported
-Possibly Fixed drain battery
-Some CPU governors
-Bluetooth OREO drivers
-Support to 9 Spectrum Profiles | some of them edited by TS Team
-Lot of I/O Shedulers : added Anxiety and Maple
-HMP settings : 680/250 and some freq chcnages
-USB charge to 600MHz in normall mode
-USB charge to 900MHz in fast mode
-Added VENO, VEGAS to TCP, etc.
-Lot of CPU governors
-Added PWM Flicker Free - default turn off
-Moro Sound Drivers v2.1.1
-Led controls with fade
-Added TTL support for IP
-SELinux Permissive
-Fixed Game Tools problem with reboots
-Added 4 cores max freq toggle
-Added Powersuspend
-Added DynamicFsync
-Added Archpower support and Gentle sleepers
-Fixed SSP sensor battery drain
-some SCSI drivers fixes for more stability
-some changes in voltage tables for lower power consumption in boot time and normal work
-added LED control with Fade feature
-added Gesture Wakeup support
-IRIS service disabled
-added Hotplugs : Alucard, AiO, Zen Decision and AutoSMP, Mako, Blue, Cluster | first kernel on S7 TW
-Added Stop background Camera Google and another Google services
- VNSwap default is ON
-ZRAM files is set max at 4,0GB
-ZRAM max disk size is now editable by user
-added Fingerprint Boost - default is OFF
-added CPU Boost for big.LITTLE Clusters - default OFF
-ZSWAP max RAM Pool set from 50 to 60%
-fixed AiO, AutoSMP hotplugs
-TWRP 3.3.0-0 fixed by AJ's
- better battery life and stability
 
texas2607

texas2607

Moderateur Global
Inscrit
5 Février 2012
Messages
10 840
Points
113
Hello
Mise à jour en v1.9

Changelog
ROM PIE NFE and N8 support
Samsung sources U4CSC4
Samsung ramdisk U4CSC4
ThunderTweaks 1.0.3.1 | adaptaded to ThundeRStormS kernels |
Flat and Edge now supported
Magisk 19.4
REMOVED : TWRP 3.3.0-0 fixed by AJ's
Knox 0x0 & SafetyNet with SuperSU and Magisk
SuperSU 2.82SR5 + SuHide v1.09
Linux 3.18.91 Samsung source
Game Tools Fix - thx to MoroGoku
Camera Fix - now SONY/SAMSUNG works
CPU Freq range : Higher Freq 2600/1586 MHz and Low Freq at 208/130 MHz
CPU Freq setup : Higher Freq 2288/1586 MHz and Low Freq at 312/234 MHz
CPU Freq setup : changes in voltage tables for lower power consuption for boot and normal work time
Fixed ABS clock to 64bit
Compiler : aarch64-linux-android-4.9
Spectrum and profiles supported
Iris service disabled
Support now 10 Spectrum Profiles with NEW ThundeRSTormS profiles
Added NEW Thunderstorm CPU Governor based on Interactive with new editable feature
Added TTL support for IP
Bluetooth OREO drivers
GPU R28 PIE drivers only
REMOVED GPU LIBS for Oreo and PIE | now rom's libs will be used.
Added new I/O scheds : Anxiety and Maple
Some CPU governors are updated
Wireguard VPN supported
Gestures Wakeup supported
Added SSP sensor battery drain
Added full support Hotplugs : Alucard, AiO, Zen Decision and AutoSMP, Mako, ClusterPlug, ThunderPlug
ZRAM max files set at 4,0GB - default OFF | Now is editable by user.
VNSwap truned ON by default | If You want to turn it OFF You have to select one option for it in Aroma Installer.
Fingerprint Boost support - default turned OFF.
Added Input Boost for big.LITTLE clusters.
Fixed AiO and AutoSMP Hotplugs for 2 Clusters Octa cores Exynos
ZSWAP RAM Pool set max from 50 to 60%
Some source fixes
Added NEBULA CPU gov
Possibly Fixed drain battery and some improvements
SELinux Permissive
 
texas2607

texas2607

Moderateur Global
Inscrit
5 Février 2012
Messages
10 840
Points
113
Salut,
Mise à jour en v2.0

Changelog
-Updated Ramdisk G930FXXS5CSF1
-Updated Sources G930FXXS5CSF1
-Linux Updated to 3.18.140
-Some Changes in Aroma by @MissACCA
-New Aroma theme by @Tagdu17 & @nalas
-New splash screen by @nalas
-Added CPU Input Boost for each core
-Two New Cpu Gov has been added
-MinMax
-Userspace
-Spectrum Profiles Updated
-Fixed Auto Installation of -ThunderTweaks by @Noid
-ThunderTweaks v1.0.3.2
-Magisk 19.4
-Better Stability and RAM -Management
 
soleil007

soleil007

Membre
Inscrit
27 Octobre 2012
Messages
130
Points
16
Salut c'est quoi un keRMel ?
Il fait parti de quel fichier BL...AP..CSC...CP
 
texas2607

texas2607

Moderateur Global
Inscrit
5 Février 2012
Messages
10 840
Points
113
Salut
Pour la 1ere question
S'il vous plaît, Connexion ou S'inscrire pour voir le contenu ou les urls !

Pour la 2ème, relis le tuto
 
Haut Bas