M
Membre supprimé 3065
- #1
Comment Installer le Kernel CUSTOM BOEFFLA Kernel ?
OnePlus 5
===============================================================================================================================================
Avertissement : Cette opération comporte des risques. Ni moi ni Phonandroid ne peuvent être tenu responsables des éventuels problèmes rencontrés. Pensez à effectuer une sauvegarde avant d'installer ce kernel!
Merci à
===============================================================================================================================================S'il vous plaît,
Connexion
ou
S'inscrire
pour voir le contenu ou les urls !
Features
Note: This kernel only runs on OOS 4.x.x for the OnePlus 5 - nothing else !!!
Important: Manually disable battery optimisation for Boeffla-Config app in the rom settings (battery -> battery-optimisation)
as on OOS 4.5.x a suspected bug does not let the app do that for you although the app tries !!!
Support of anykernel concept (only latest kernels) - flash stock kernel before flashing Boeffla
Full integration with Boeffla-Config V2 (you need at least version 2.4.38 or higher !!!) configuration app (get it from
Dash charging fully supported
The two CPU clusters (big and little cpu) can be configured completely separate in terms of min/max frequencies, governors and CPU core profiles
Additional governors: none yet, but planned
Additional schedulers: fiops, bfq, sio, sioplus, fifo, vr, tripndroid and zen
Underclocking CPU and GPU supported
No CPU overclocking and voltage interface, no GPU overclocking and voltage interface (not planned too)
GPU boost implemented (4 levels)
CPU core profiles to restrict number of CPU cores being used (the OP5 does not hotplug based on load)
Notification LED control (effect + speed for blinking/fading, brightness for continuous notification like battery charging etc.)
Dynamic FSync (activated if screen on, deactived if screen off), configurable
Input boost frequencies and duration configurable per CPU cluster, input boost switch
Show CPU frequency usage per CPU and frequency in Boeffla-Config
Show current CPU core frequencies in realtime (note: other apps than Boeffla-Config will likely display wrong information on offline cores as they are not up-to-date yet)
Show GPU frequency usage per frequency in Boeffla-Config
KCal V2 Color control
Swipe2wake gestures
Control haptic feedback of gestures (except fingerprint)
Swipe2sleep gestures
SD card read ahead buffer configurable (default increased to 1024 kB)
Ext4 File system tweaks (default to on, can be disabled)
Kernel logger (dmesg) configurable
CIFS support (module, do not mount inside /data, if you rooted with Chainfire SuperSu, make sure you uncheck the namespace separation in SuperSu app)
NFS read-only support (module)
NTFS support (module)
XBox support (module)
OTG-Ethernet support (module)
TCP Congestion changed to Westwood
Many additional TCP congestion algorithms available
Entropy values configurable
Hardware touch keys locked as long as screen is in use (touched) for better usability (default, but configurable)
Swap supported
Various kernel tweaks
Doze mode configurable in Boeffla-Config
Full selinux strict support (switchable to permissive on demand)
Show speedbin information (PVS level) in Boeffla-Config app
init.d support (in /system/etc/init.d - set correct permissions!)
Automatic EFS backup
Fully supports OOS device encryption, but does not force it
Integrated full busybox 1.26.2 (own compilation)
Compatible with systemless root
Safetynet: verifiedbootstate + additional flags removed
Kernel initialisation log file (with history of 3 log files)
Emergency reset script automatically placed into /boeffla-kernel-data folder of your internal memory
Google gcc 4.9 toolchain (64 bit) used for best stability
Always based on latest OOS kernel sources (https://github.com/OnePlusOSS/androi...neplus_msm8998)
Features planned for next future:
Additional governors
Boeffla-Sound engine: Headphone volume and speaker volume (only lowering volumes for speaker)
Haptic feedback intensity control
Bump USB default charge rate up to 900mA
Important: Manually disable battery optimisation for Boeffla-Config app in the rom settings (battery -> battery-optimisation)
as on OOS 4.5.x a suspected bug does not let the app do that for you although the app tries !!!
Support of anykernel concept (only latest kernels) - flash stock kernel before flashing Boeffla
Full integration with Boeffla-Config V2 (you need at least version 2.4.38 or higher !!!) configuration app (get it from
S'il vous plaît,
Connexion
ou
S'inscrire
pour voir le contenu ou les urls !
to configure all kernel settingsDash charging fully supported
The two CPU clusters (big and little cpu) can be configured completely separate in terms of min/max frequencies, governors and CPU core profiles
Additional governors: none yet, but planned
Additional schedulers: fiops, bfq, sio, sioplus, fifo, vr, tripndroid and zen
Underclocking CPU and GPU supported
No CPU overclocking and voltage interface, no GPU overclocking and voltage interface (not planned too)
GPU boost implemented (4 levels)
CPU core profiles to restrict number of CPU cores being used (the OP5 does not hotplug based on load)
Notification LED control (effect + speed for blinking/fading, brightness for continuous notification like battery charging etc.)
Dynamic FSync (activated if screen on, deactived if screen off), configurable
Input boost frequencies and duration configurable per CPU cluster, input boost switch
Show CPU frequency usage per CPU and frequency in Boeffla-Config
Show current CPU core frequencies in realtime (note: other apps than Boeffla-Config will likely display wrong information on offline cores as they are not up-to-date yet)
Show GPU frequency usage per frequency in Boeffla-Config
KCal V2 Color control
Swipe2wake gestures
Control haptic feedback of gestures (except fingerprint)
Swipe2sleep gestures
SD card read ahead buffer configurable (default increased to 1024 kB)
Ext4 File system tweaks (default to on, can be disabled)
Kernel logger (dmesg) configurable
CIFS support (module, do not mount inside /data, if you rooted with Chainfire SuperSu, make sure you uncheck the namespace separation in SuperSu app)
NFS read-only support (module)
NTFS support (module)
XBox support (module)
OTG-Ethernet support (module)
TCP Congestion changed to Westwood
Many additional TCP congestion algorithms available
Entropy values configurable
Hardware touch keys locked as long as screen is in use (touched) for better usability (default, but configurable)
Swap supported
Various kernel tweaks
Doze mode configurable in Boeffla-Config
Full selinux strict support (switchable to permissive on demand)
Show speedbin information (PVS level) in Boeffla-Config app
init.d support (in /system/etc/init.d - set correct permissions!)
Automatic EFS backup
Fully supports OOS device encryption, but does not force it
Integrated full busybox 1.26.2 (own compilation)
Compatible with systemless root
Safetynet: verifiedbootstate + additional flags removed
Kernel initialisation log file (with history of 3 log files)
Emergency reset script automatically placed into /boeffla-kernel-data folder of your internal memory
Google gcc 4.9 toolchain (64 bit) used for best stability
Always based on latest OOS kernel sources (https://github.com/OnePlusOSS/androi...neplus_msm8998)
Features planned for next future:
Additional governors
Boeffla-Sound engine: Headphone volume and speaker volume (only lowering volumes for speaker)
Haptic feedback intensity control
Bump USB default charge rate up to 900mA
- Copier/coller le fichier zip désiré que vous avez téléchargé dans la mémoire interne ou externe de votre téléphone.
- Redémarrer en mode recovery
- Allez dans Backup & restore, puis choississez Backup pour faire une sauvegarde de votre système actuel
- Sélectionnez Wipe cache partiton puis validez sur Yes.
- Sélectionnez Advanced puis Wipe dalvik cache puis validez sur Yes.
- Sélectionnez Install .zip from sdcard.
- Choisissez Choose zip file et validez.
- Sélectionnez le fichier .zip désiré et validez.
- Sélectionnez Reboot System Now dans le menu Recovery pour redémarrer votre téléphone.
S'il vous plaît,
Connexion
ou
S'inscrire
pour voir le contenu ou les urls !
ainsi que l'appli Boeffla config S'il vous plaît,
Connexion
ou
S'inscrire
pour voir le contenu ou les urls !
