Scumpi
Membre
- Inscrit
- 26 Septembre 2012
- Messages
- 25 689
- Points
- 48
- #1
Comment Installer le Kernel Blaze™ Kernel -4 ?
Samsung Galaxy Note 3 N9005
S'il vous plaît,
Connexion
ou
S'inscrire
pour voir le contenu ou les urls !
Avertissement : Cette opération comporte des risques. Ni moi ni Phonandroid ne peuvent être tenu responsables des éventuels problèmes rencontrés. Pensez à effectuer une sauvegarde avant d'installer ce kernel!!
Merci à
===============================================================================================================================================S'il vous plaît,
Connexion
ou
S'inscrire
pour voir le contenu ou les urls !
Pré-requis
- Un Samsung Galaxy Note 3 N9005 avec un firmware TouchWiz sous Android 4.4.2
- Avoir installé les drivers USB fourni avec le mobile ( Voir tutoriel :
- Avoir rooté son téléphone ( Voir tutoriel : ou Root avec CF Auto Root - Samsung Galaxy Note 3)
- Un Recovery Custom ( Voir tutoriel : Installer le ClockWorkMod Recovery - Samsung Galaxy Note 3 N900 N900S)
- Avoir téléchargé le fichier suivant --> S'il vous plaît, Connexion ou S'inscrire pour voir le contenu ou les urls !-S'il vous plaît, Connexion ou S'inscrire pour voir le contenu ou les urls !
- Assurez vous d'avoir une batterie chargée au maximum (mini 75%)
Caractéristiques
Code:
S'il vous plaît,
Connexion
ou
S'inscrire
to view codes content!
Changelog
| Version-4 Release..!! Date-2-Jun-2014 |
---------------------------------------------
[*]Updated to latest upstream i.e. 3.4.91
[*]workqueues: Introduce new flag WQ_POWER_EFFICIENT for power oriented …
[*]workqueue: Add system wide power_efficient workqueues
[*]block: queue work on power efficient wq
[*]Add Google's Snappy compression library (v5)
[*]lz4: always set an error return code on failures
[*]ARM: smp: Make SMP operations mandatory
[*]More patches taken from Code Aurora forum
[*]sched: Remove extra put_online_cpus() inside sched_setaffinity()
[*]ARM: SoC: convert MSM to SMP operations
[*]ARM: smp: remove wrapper functions
---------------------------------------------
| Version-3 Release..!! Date-30-May-2014 |
---------------------------------------------
[*]Update Linux Source to latest 3.4.90 upstream..! (Compare the improvement)
[*]Lowmemorykiller Updates and Tweaks for more free ram and smoothness
[*]Slimbus overclocking (Best Sound Quality)
[*]Ultra Kernel Samepage Merging Feature(UKSM) (better than KSM)
[*]workque backport updates from Linux 3.7
[*]af_unix: speedup /proc/net/unix
[*]Use vfpv4 with neon
[*]intelliplug set to default
[*]removed auto_hotplug
[*]Fix Checkpatch issues in binder.c
[*]tick: Dyanmically ser broadcast irq affinity
[*]kthread: Implement park/unpark facility and other changes
---------------------------------------------
| Version-2 Release..!! Date-28-May-2014 |
---------------------------------------------
[*] f2fs: data: AIO optimization compatibility fixup
[*] exfat_super: add AIO optimization support
[*]update intelliplug to 2.6
[*] Add Enhanced Simple GPU Governor taken from @faux123
[*]add support for read_iter and write_iter
[*]SIO Scheduler is now set to default...!
---------------------------------------------
| Version-1 Release..!! Date-21-May-2014 |
---------------------------------------------
[*]Based on Latest Sources
[*]Compiled Kernel with Latest Cortex A15 optimized SaberMOD 4.10 Toolchain
[*]Built with -O3 optimizations
[*]Cortex A15 optimizations
[*]LZO compression for kernel. Size 8.3MB ==> 8.7 MB
[*]Added cdrom option to UMS-lun-devices
[*]Reduced Logbuffer shift
[*]KSM for Page Merging
[*]Slimbus overclocking (Best Sound Quality)
[*]Ultra Kernel Samepage Merging Feature(UKSM) (better than KSM)
[*]Use vfpv4 with neon
[*]Support undervolt/overvolting via sysfs interface/apps interface
[*]CFS parameters improved for more responsiveness
[*]Activated and tweaked conservative governor
[*]Kernel timer from 100 => 200
[*]Added Time Slack Controller
[*]Added ASYNC_FSYNC for faster system
[*]Dynamic management of timer slack
[*]Lock initial TCP window size to 64k (Improves network ping and output)
[*]Faster NOATIME and NODIRATIME mounting flags
[*]Disabled Gentle Fair Sleepers
[*]Enabled ARCH_POWER
[*]fixed CIFS issues
[*]smp: patches from mainline 3.5 to help with hotplug efficiency
[*]added mutex optimization (better multi-tasking)
[*]scheduler optimization (smoother multi-tasking)
[*]futex backport from Linux 3.13+
[*]add f2fs drivers for future F2FS support /data partition on some ROMs
[*]slab/slub forward ported to Linux 3.8+
[*]backported 3.12+ kernel scheduler features
[*]Asynchronous I/O latency to a solid-state disk greatly increased
[*]Patches to prevent depleting Entropies
[*]Frandom driver - Fast Kernel Number Generator
[*]Add optimized AES and SHA1 routines
[*]Optimized git implementation for SHA1
[*]Optimized glibc version of string
[*]Optimized ARM RWSEM algorithm
[*]Optimized AES and SHA1 routines
[*]More CPU Governors ( intelliactive , performance , conservative(updated) , powersave , Wheatley , ondemand , ondemandplus , abyssplug , abyssplugv2 , userspace , interactive , smartassH3 )
[*]More I/O Schdedulers ( FIOPS , Deadline , CFQ , ROW , BFQ(v6) , SIO , No-op , V(R) , ZEN )
[*]Optimized apply_slack() method for size and speed
[*]Enabled 5 new TCP Congestion controls viz. Westwood, Veno, BIC, Reno, HTCP
[*]Optimized memcopy and memmove algorithm[*]Optimized VM dirty ratios
[*]Optimized CFQ scheduler-you really don't need any other IO scheduler
[*]NTFS Filesystem support
[*]Increase READ_AHEAD size to 512Kb
[*]Cleancache enabled
[*]Ability to change IO-Schedulers without need of root
[*]Optimizations to SLUB memory allocator
[*]Added config.gz support
[*]Added Intelli_active governor
[*]Added ROW IOScheduler
[*]Added FIOPS IOScheduler
[*]Added BFQ IOScheduler
[*]snakecharmer (cpufreq_limit) active
[*]add fauxsound support
[*]disabled kernel debugging code to reduce code size and improve performance
[*]made touch boost generic for intelliactive
[*]intelli-thermal reduce sampling overhead
[*]add official f2fs kernel support
[*]cpufreq limit (aka snake charmer) is now built-in to kernel
[*]add crypto lib optimization
[*]zram use lz4
[*]added new power management mode "PowerSuspend"
[*]added LZ4 compression (faster than LZO)
[*]more accurate load calculations (better battery/performance)
---------------------------------------------
[*]Updated to latest upstream i.e. 3.4.91
[*]workqueues: Introduce new flag WQ_POWER_EFFICIENT for power oriented …
[*]workqueue: Add system wide power_efficient workqueues
[*]block: queue work on power efficient wq
[*]Add Google's Snappy compression library (v5)
[*]lz4: always set an error return code on failures
[*]ARM: smp: Make SMP operations mandatory
[*]More patches taken from Code Aurora forum
[*]sched: Remove extra put_online_cpus() inside sched_setaffinity()
[*]ARM: SoC: convert MSM to SMP operations
[*]ARM: smp: remove wrapper functions
---------------------------------------------
| Version-3 Release..!! Date-30-May-2014 |
---------------------------------------------
[*]Update Linux Source to latest 3.4.90 upstream..! (Compare the improvement)
[*]Lowmemorykiller Updates and Tweaks for more free ram and smoothness
[*]Slimbus overclocking (Best Sound Quality)
[*]Ultra Kernel Samepage Merging Feature(UKSM) (better than KSM)
[*]workque backport updates from Linux 3.7
[*]af_unix: speedup /proc/net/unix
[*]Use vfpv4 with neon
[*]intelliplug set to default
[*]removed auto_hotplug
[*]Fix Checkpatch issues in binder.c
[*]tick: Dyanmically ser broadcast irq affinity
[*]kthread: Implement park/unpark facility and other changes
---------------------------------------------
| Version-2 Release..!! Date-28-May-2014 |
---------------------------------------------
[*] f2fs: data: AIO optimization compatibility fixup
[*] exfat_super: add AIO optimization support
[*]update intelliplug to 2.6
[*] Add Enhanced Simple GPU Governor taken from @faux123
[*]add support for read_iter and write_iter
[*]SIO Scheduler is now set to default...!
---------------------------------------------
| Version-1 Release..!! Date-21-May-2014 |
---------------------------------------------
[*]Based on Latest Sources
[*]Compiled Kernel with Latest Cortex A15 optimized SaberMOD 4.10 Toolchain
[*]Built with -O3 optimizations
[*]Cortex A15 optimizations
[*]LZO compression for kernel. Size 8.3MB ==> 8.7 MB
[*]Added cdrom option to UMS-lun-devices
[*]Reduced Logbuffer shift
[*]KSM for Page Merging
[*]Slimbus overclocking (Best Sound Quality)
[*]Ultra Kernel Samepage Merging Feature(UKSM) (better than KSM)
[*]Use vfpv4 with neon
[*]Support undervolt/overvolting via sysfs interface/apps interface
[*]CFS parameters improved for more responsiveness
[*]Activated and tweaked conservative governor
[*]Kernel timer from 100 => 200
[*]Added Time Slack Controller
[*]Added ASYNC_FSYNC for faster system
[*]Dynamic management of timer slack
[*]Lock initial TCP window size to 64k (Improves network ping and output)
[*]Faster NOATIME and NODIRATIME mounting flags
[*]Disabled Gentle Fair Sleepers
[*]Enabled ARCH_POWER
[*]fixed CIFS issues
[*]smp: patches from mainline 3.5 to help with hotplug efficiency
[*]added mutex optimization (better multi-tasking)
[*]scheduler optimization (smoother multi-tasking)
[*]futex backport from Linux 3.13+
[*]add f2fs drivers for future F2FS support /data partition on some ROMs
[*]slab/slub forward ported to Linux 3.8+
[*]backported 3.12+ kernel scheduler features
[*]Asynchronous I/O latency to a solid-state disk greatly increased
[*]Patches to prevent depleting Entropies
[*]Frandom driver - Fast Kernel Number Generator
[*]Add optimized AES and SHA1 routines
[*]Optimized git implementation for SHA1
[*]Optimized glibc version of string
[*]Optimized ARM RWSEM algorithm
[*]Optimized AES and SHA1 routines
[*]More CPU Governors ( intelliactive , performance , conservative(updated) , powersave , Wheatley , ondemand , ondemandplus , abyssplug , abyssplugv2 , userspace , interactive , smartassH3 )
[*]More I/O Schdedulers ( FIOPS , Deadline , CFQ , ROW , BFQ(v6) , SIO , No-op , V(R) , ZEN )
[*]Optimized apply_slack() method for size and speed
[*]Enabled 5 new TCP Congestion controls viz. Westwood, Veno, BIC, Reno, HTCP
[*]Optimized memcopy and memmove algorithm[*]Optimized VM dirty ratios
[*]Optimized CFQ scheduler-you really don't need any other IO scheduler
[*]NTFS Filesystem support
[*]Increase READ_AHEAD size to 512Kb
[*]Cleancache enabled
[*]Ability to change IO-Schedulers without need of root
[*]Optimizations to SLUB memory allocator
[*]Added config.gz support
[*]Added Intelli_active governor
[*]Added ROW IOScheduler
[*]Added FIOPS IOScheduler
[*]Added BFQ IOScheduler
[*]snakecharmer (cpufreq_limit) active
[*]add fauxsound support
[*]disabled kernel debugging code to reduce code size and improve performance
[*]made touch boost generic for intelliactive
[*]intelli-thermal reduce sampling overhead
[*]add official f2fs kernel support
[*]cpufreq limit (aka snake charmer) is now built-in to kernel
[*]add crypto lib optimization
[*]zram use lz4
[*]added new power management mode "PowerSuspend"
[*]added LZ4 compression (faster than LZO)
[*]more accurate load calculations (better battery/performance)
===============================================================================================================================================
Installation
Via le recovery custom
Connectez votre mobile à votre ordinateur.
- Copiez/collez le fichier .zip à la racine de votre Sd card.
- Éteignez votre mobile.
- Appuyez simultanément sur les touches Volume Haut + Home + Power pour redémarrer en recovery.
- Sélectionnez Advanced puis Wipe Dalvik cache et validez sur Yes.
- Sélectionnez Wipe cache partition puis validez sur Yes.
- Ensuite, sélectionnez install zip from sdcard dans le menu Recovery.
- Puis, sélectionnez Choose zip from sdcard.
- Enfin, choisissez le fichier .zip et validez sur Yes.
- Enfin, sélectionnez Reboot System Now lorsque vous avez terminé
- Votre mobile va redémarrer. Soyez patient au premier redémarrage.
Vos retours sont les bienvenus