How to fix canon printer error b200?

Statut
N'est pas ouverte pour d'autres réponses.
printerhelpcenter

printerhelpcenter

Membre
Inscrit
17 Janvier 2020
Messages
1
Points
1
In this post, you will be going to learn how to fix canon printer error b200 by yourself. Usually, the fault of any printer indicates that the print head has died the print head voltage or the print head temperature is not normal. In some cases, the error of b200 also means that the print head has been damaged and unable to be used. Or there is a problem with the cartridges.



The Canon printers come in 2 cartridges or 4+ cartridges. If you have four or more cartridges on your printer, you will need to follow the following steps. If you have a printer with two cartridges, skip to the next section.



Step 1: Remove all cartridges. Open the lid of your printer and the cartridge cradle will start to move into the correct position for being removed. Remove all the individual cartridges from your printer.



Step 2: Remove the print head. Since the print head is affected, we need to remove the print head by lifting the orange / gray locking lever of the cartridge cradle on the side. This will allow the print head to be removed easily.



Step 3: Re-install the print head. Clean the print head and put it back in its original position. Make sure that it is placed firmly into place.



Step 4: Re-install the cartridges. Put all the cartridges back correctly into their slots and close any open doors. The printer will start reading the cartridges and print heads.



Step 5: Restart the printer. Remove the printer plug from the power source and leave it for a few minutes. The print head and the cartridge slots will be cooled. Put the device back into the wall socket.



Step 6: Do a Nozzle check. The
S'il vous plaît, Connexion ou S'inscrire pour voir le contenu ou les urls !
happens when the printer uses the print head. So, perform a nozzle check to make sure that the correct cartridge has been replaced with the nozzle check. Once it is confirmed, you can proceed to use your printer regularly.

If the problems are not fixed, you will need to replace the print head with a new one.



After knowing what you have to do when you have a printer with two cartridges now, let's discuss the Printer troubleshooting steps for the canon printer B200 error .



Printer troubleshooting steps of printer error B200



To solve printer error problem do follow the mentioned steps which are given below;



1. Firstly, you need to reset the printer.

2. If any obstruction were present, then, remove it.

3. By using your PC's printer maintenance options clean printer head.

4. Ensure you will clean the print head manually clean the print head.

5. Then, remove the old ink.

6. After that re-install your drivers of the printer.

7. Later, try a new ink cartridge.

8. In case if none of those mentioned above methods works, then the B200 error is probably valid.

To know more about
S'il vous plaît, Connexion ou S'inscrire pour voir le contenu ou les urls !
click here



This is some major printer service solutions we have for you. We ensure you that by applying these methods you can solve Canon Printer error B200 . Still, if you face any trouble then, visit the service center of your printer.
 
texas2607

texas2607

Moderateur Global
Inscrit
5 Février 2012
Messages
14 681
Points
113
Salut
C'est un forum Français, merci.
 
Skelett

Skelett

Moderateur Global
Inscrit
12 Mai 2013
Messages
14 896
Points
113
Hello,

Et on s'en tape, on ne fait pas dans les imprimantes :p
 
Dernière édition:
  • Haha
Les réactions: texas2607
texas2607

texas2607

Moderateur Global
Inscrit
5 Février 2012
Messages
14 681
Points
113
Salut Jérôme,
Je n'avais même pas lu :LOL::LOL:
 
  • Haha
Les réactions: Skelett
Skelett

Skelett

Moderateur Global
Inscrit
12 Mai 2013
Messages
14 896
Points
113
Ouais, tu as vu le "How To" et tu t'es dit "Ça dégage", quoi :ROFLMAO:

J'ai juste lu le titre, pas le reste :ROFLMAO:
 
Statut
N'est pas ouverte pour d'autres réponses.
Haut Bas